Abstract:The interlayer mechanical properties of composite asphalt pavement structure based on the base surface morphology of a concrete surface, adhesive layer material, working environment, and other factors are complex. As discussed, the field of mass production samples, combined with laboratory shear tests, confirms the rationality of shear test in the composite interlayer shear strength evaluation, presents the composite shear strength test method of the interlayer and corrected maximum interlaminar shear strength calculation formula, further introduces the evaluation method of anti-shear strength of composite pavement, and verifies the feasibility of the method based on the results that should be used for the project compared with the surface by sandblasting and chiseling treatment, adhesive layer material, working temperature, molding method, loading method, degree of pollution, and other factors on the interface shear strength of the adhesive layer. Results indicate that the surface roughness, temperature, test factors of molding methods, loading rate, and interlayer contamination strongly influence the bonding performance between layers and in the construction of the best texture depth value and maximum shear strength between layers. The best interface texture depth is decided by the factor waterproof bonding layer type, interface roughness method, and base geometry node of the base surface. The shear performance of SBS asphalt Synchronous Crushed Stone Seal Coat interlayer sensitivity to temperature is greater than that of polymer reaction-type waterproof adhesive material. The maximum shear strength calculation formula was introduced in the special road section and temperature correction coefficient. The interlayer temperature is 40℃ when the shear strength between layers is the main control index. The calculation results and evaluation index of consistency, shear-stress test method, and system method interlaminar shear strength evaluation can be used for pavement structure design and performance evaluation.

Shear Property Demands of Binding Layer on Concrete Bridge Pavement and Simplified Calculation

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

A Novel Approach for the Mechanical Response of Cement Concrete Pavement Structure Considering the Interlaminar Interface Shear Slip Effect

Test and Evaluation Method of lnterlaminar Shear Performance of Composite Pavement

Shear-friction behavior of concrete-to-concrete interface under direct shear load

Experimental Study on Direct Shear Performance of Concrete-Concrete Interface of Prefabricated Structure Sleeve Grouting Connection

Development and Optimization of Ultimate Performance Self-Levelling Epoxy Asphalt Concrete (USEA) for Prefabricated Deck Pavement

Shear Resistance Performance Evaluations of Rubber Asphalt Waterproof Adhesive Layer on Bridge Deck

Shear Fatigue Performance of Epoxy Resin Waterproof Adhesive Layer on Steel Bridge Deck Pavement

Load stress in concrete pavement on concrete bridges

Experimental and Numerical Analysis of a Waterproofing Adhesive Layer Used on Concrete-Bridge Decks

Interlaminar Bonding Properties on Cement Concrete Deck and Phosphorous Slag Asphalt Pavement

Finite Element Analysis and Laboratory Testing for Design of Asphalt Concrete Pavement on Concrete Bridges

Numerical Analysis for Basalt Fiber Reinforced High-Viscosity Asphalt Concrete Bridge Deck Pavement

Mechanical Characterisation of Interface Shear Strain of Multi-Layer Composite Pavement

Numerical and Experimental Analysis for the Interlayer Behavior of Double-Layered Asphalt Pavement Specimens

Viscoelasticity finite element analysis of interface bonding behaviors of asphalt pavement

Experimental Investigation on Shear Behavior of the Interface between Early-Strength Self-Compacting Shrinkage-Compensating High-Performance Concrete and Ordinary Concrete Substrate

Mechanical response analysis and road performance of WEPA waterproof adhesive layer on concrete bridge deck

Characterization of Bonding between Asphalt Concrete Layer under Water and Salt Erosion

Enhancing adhesive interlayer performance with waste tire rubber and amorphous poly alpha olefin compound modified asphalt