Abstract:Developing prefabricated bridge deck pavement systems can fundamentally avoid the drawbacks caused by traditional on-site construction such as poor continuity of the construction process and significant differences in pavement layer performance. Prefabricated bridge deck pavement requires that the bridge pavement is completed with the steel deck together in the factory indoors thus it needs the concrete has better self-leveling characteristics which is rare for existing pavement materials. This article develops the ultimate performance selflevelling epoxy asphalt concrete (USEA) which both have excellent self-leveling properties and comprehensive performance. The study initially established the self-leveling asphalt concrete rolling model based on asphalt film thickness theory and Hertz contact theory and the critical rolling mechanical calculation results states that the aggregate particles and the skeleton amounts are the key elements for fluidity of concrete. Comprehensive the analysis of rolling model and research on the curing reaction process of epoxy resin, the study raises the material configuration of USEA and determine the gradation by the Bailey's method. To guarantee the better pavement performance of USEA, the study designs the orthogonal test and establish the Entropy-TOPSIS model to optimize the details mortar schemes of concrete. Through the model calculation, the epoxy resin content and the SBS modified asphalt oil-stone ratio are determined as 20 % and 8.0 % respectively. In this scheme, the high temperature stability is 2805 times & sdot;mm-1, the low temperature bending strain is 3662 mu epsilon and the fatigue life can reach 1.200 million times. The study provides a material selection for the development of prefabricated bridge pavement system and the technical reference for the development of other self-leveling materials which has constructive practical significance.

Experimental and Numerical Analysis of a Waterproofing Adhesive Layer Used on Concrete-Bridge Decks

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Mechanical response analysis and road performance of WEPA waterproof adhesive layer on concrete bridge deck

Experimental Study of Waterproof Membranes on Concrete Deck: Interface Adhesion under Influences of Critical Factors

Finite Element Analysis and Laboratory Testing for Design of Asphalt Concrete Pavement on Concrete Bridges

Numerical Analysis for Basalt Fiber Reinforced High-Viscosity Asphalt Concrete Bridge Deck Pavement

Shear Fatigue Performance of Epoxy Resin Waterproof Adhesive Layer on Steel Bridge Deck Pavement

Measurements with a New Peel Adhesion Test on Waterproof Membranes Used on Concrete Bridge Decks

Study on the influence factors on the design and road performance of high-performance waterproof adhesive material for concrete bridge decks

Performance Evaluation and Optimization of Waterproof Adhesive Layer for Concrete Bridge Deck in Seasonal Frozen Region Using AHP

Overview: Application of Resin Waterproof Adhesive Materials in Bridge Deck Pavement in China

Development and Optimization of Ultimate Performance Self-Levelling Epoxy Asphalt Concrete (USEA) for Prefabricated Deck Pavement

Experimental Study of the Factors Influencing the Performance of the Bonding Interface between Epoxy Asphalt Concrete Pavement and a Steel Bridge Deck

Laboratory Testing Material Property and FE Modeling Structural Response of PAM-Modified Concrete Overlay on Bridges

Load Analysis on Asphalt Concrete Deck Pavement With Submodel Method

Enhancing adhesive interlayer performance with waste tire rubber and amorphous poly alpha olefin compound modified asphalt

Integrated Design of Structure and Material of Epoxy Asphalt Mixture Used in Steel Bridge Deck Pavement

Load stress in concrete pavement on concrete bridges

Rubber asphalt waterproof adhesive layer for steel bridge gussasphalt pavement

Shear Property Demands of Binding Layer on Concrete Bridge Pavement and Simplified Calculation

Influence of Water on Shear Bond Properties of FRP-concrete Interfaces