Abstract:A new technology to the pharmaceutical field is presented: surface decontamination by plasmas The technology is comparable to established barrier systems like e-beam, volatile hydrogen peroxide, or radiation inactivation of microbiological contaminations. This plasma technology is part of a fully automated and validated syringe filling line at a major pharmaceutical company and is in production operation. Incoming pre-sterilized syringe containers ("tubs") are processed by plasma, solely on the outside, and passed into the aseptic filling isolator upon successful decontamination. The objective of this article is to present the operating principles and develop and establish a validation routine on the basis of standard commercial biological indicators. Their decontamination efficacies are determined and correlated to the actual inactivation efficacy on the pharmaceutical packaging material.The reference setup is explained in detail and a short presentation of the cycle development and the relevant plasma control parameters is given, with a special focus on the in-process monitor determining the cycle validity. Different microbial inactivation mechanisms are also discussed and evaluated for their contribution and interaction to enhance plasma decontamination. A material-dependent inactivation behavior was observed. In order to be able to correlate the tub surface inactivation of Geobacillus stearothermophilus endospores to metallic biological indicators, a comparative study was performed. Through consistently demonstrating the linear inactivation behavior between the different materials, it becomes possible to develop an effective and time-saving validation scheme. Lay abstract: The challenge in new decontamination systems lies in a thorough validation of the inactivation efficacy under different operating regimes. With plasma, as an ionized gas, a new barrier concept is introduced into pharmaceutical aseptic processing of syringes. The presented system operates in vacuum and only decontaminates the outer surface of pre-sterilized syringe containers ("tubs"), before they are transferred into the aseptic area. The plasma does not penetrate into the tub. This article discusses the phase from development and test germ selection, across the identified sporicidal mechanisms, to a proposal for a validation scheme on the basis of commercially available biological indicators. A special focus is placed on an extensive investigation to establish a link between the tub surface microbial kill (polystyrene and Tyvek(and (2)) ) and biological indicator inactivation (stainless steel). Additionally, a rationale is developed on how an optical in-process monitor can be applied to establish a validatable limit on the base of the predetermined inactivation data of Geobacillus stearothermophilus endospores.

Enhanced physical and chemical processes by solid packing in the plasma reactor for the inactivation of Microcystis aeruginosa

[Growth inhibition of Microcystis aeruginosa in packed-bed discharge plasma Reactor]

Water disinfection by pulsed atmospheric air plasma along water surface

Experimental Study on Bacteria Disinfection Using a Pulsed Cold Plasma Jet with Helium/oxygen Mixed Gas

Rapid Disinfection Performance of a Touchable Pulsed SDBD Nonthermal Plasma

State-of-the-art non-thermal plasma disinfection and medicine

Improved Cyanobacteria Removal From Harmful Algae Blooms By Two-Cycle, Low-Frequency, Low-Density, And Short-Duration Ultrasonic Radiation

Feasibility and mechanism of removing Microcystis aeruginosa and degrading microcystin-LR by dielectric barrier discharge plasma

Inactivation effect and mechanism of Pediastrum by in-liquid pulsed discharge plasma

Plasma Decontamination: A Case Study on Kill Efficacy of Geobacillus stearothermophilus Spores on Different Carrier Materials

Enhancement of Plasma Chemistry Process in a Gas-Liquid-solid Three-Phase Discharge Reactor

Atmospheric pressure dielectric barrier discharge plasma for in-situ water treatment using a bubbling reactor

Effect of Pellet Size on No(X) Removal in the Packed Bed Plasma Reactor

Degradation performance and mechanism of microcystins in aquaculture water using low-temperature plasma technology

Nanosecond‐pulsed microbubble plasma reactor for plasma‐activated water generation and bacterial inactivation

Evaluation of microbial species inactivation and purification of pond sewage by a custom‐built air surface discharge plasma

Combination of Pulsed Electric Fields and Non-Thermal Plasma Jet for More Effective Bacterial Decontamination

Enhancement of Active Species Formation by Catalysis in the Bipolar Pulsed Discharge Plasma System

Elimination of Chlorella using peracetic acid activated by dielectric barrier discharge plasma: Mechanism and cell deactivation process

The removal of Microcystis aeruginosa in water by gamma-ray irradiation

Transport of microplastics treated with dielectric barrier discharge (DBD) plasma in saturated porous media