Abstract:Carbon fiber reinforced polymer composite material exhibits excellent mechanical properties, such as high specific stiffness and strength, which bring its increasing use in aerospace and aircraft structures. Theses structures made of composites are mostly produced in near-net-shape, but machining processes such as drilling are usually inevitable for satisfying dimensional tolerances, functional and assembly requirements. Due to heterogeneous, anisotropic, and trans-scale characteristics of composites, the material removal mechanism of composites by machining is quite different from that of metals, thus the well-developed analytical and numerical methods of metal machining cannot be directly applied for the machining of composites.The present paper studies the particular material removal mechanism of machining composites by a micro-mechanical model, and proposes a prediction model of cutting forces based on a two-parameter elastic foundation beam model. The micro-mechanical model of a representative volume element (RVE) in machining a lamina is established with explicit description of the carbon fiber and the matrix. The fiber in the RVE is subjected to cutting forces, and is supported by the rest of the composite. Thus the deflection of the fiber is constrained by the composite surrounding the fiber, which can be modeled as a beam on an elastic foundation. Analytical expressions are established for evaluating the cutting forces and the debonding between the fiber and the matrix using the micro-mechanical model. Different failure modes of fibers with the constraint effect of the surrounding composite can be recognized from the analytical solutions. The effects of variable depths of cutting, different supporting effects on the material removal are presented in the numerical examples. By revealing the fiber deformation, fiber fracture and debonding between the fiber and the matrix, the material removal mechanism is studied for machining carbon fiber reinforced polymer composite.

A Finite Element Model to Simulate the Cutting of Carbon Fiber Reinforced Composite Materials

Finite Element Simulation Of High-Speed Cutting Alloy Cast Iron

Modeling and Analysis of Force Prediction in Milling Process of Unidirectional Fiber Reinforced Polymer Composites

Investigation on the Effects of Microstructure on Machining Unidirectional Carbon Fiber Reinforced Polymer Composites with a Modified Force Model

Factor Analysis of Machining Parameters of Fiber-Reinforced Polymer Composites Based on Finite Element Simulation with Experimental Investigation

Carbon Fiber Composite Materials Finite Element Simulation Analysis of Cutting Force

Numerical Simulation of the Orthogonal Cutting of Carbon Fiber Reinforced Composite Material

Micro-Mechanical Model And Material Removal Mechanism Of Machining Carbon Fiber Reinforced Polymer Composite

Research on the Mesoscopic Cutting Mechanism of CFRP Based on Three-dimensional Multiphase Finite Element Models

2D Macro-Mechanical FE Simulations for Machining Unidirectional FRP Composite: the Influence of Damage Models

Finite Element Analysis when Orthogonal Cutting of Hybrid Composite CFRP/Ti

Finite element simulation of ultrasonic vibration assisted turning of carbon fiber reinforced polymer composite

Investigations on Micro-Cutting Mechanism and Surface Quality of Carbon Fiber-Reinforced Plastic Composites

Cutting modeling using cohesive zone concept of titanium/CFRP composite stacks

Simulation Machining of Fiber-Reinforced Composites: A Review

Analytical and Numerical Investigation on the Mechanical Behavior of Subsurface Damage During Orthogonal Cutting of Carbon Fiber Reinforced Polymer Composites

Three-dimensional finite element simulations of milling carbon/epoxy composites

Microscopic analytical and numerical investigation of orthogonal cutting cfrp

Study on the formation mechanism of cutting surface of carbon fiber-reinforced composites

A 3d Progressive Material Damage Model for Fe Simulation of Machining A Unidirectional Frp Composite

Evaluation of heat generation using a microscopic cutting model with thermo-mechanical coupling for carbon fiber reinforced polymer composites