Abstract:The three-dimensional transient temperature field for disc brake were simulated using software COMSOL Multiphysics,the situation of temperature distribution for friction pairs device in the braking process and the effect of material thermal parameters on its temperature field were investigated.The results showed that at the high-temperature moment of the braking process of the disc brake,the high temperature place was located on the area of sliding out with the friction plate along the disk rotates direction;the surface temperature of brake disc decreased from the high temperature zone along the direction of the brake disc rotation;the surface temperature of friction plate decreased along the opposite direction of the brake disc rotation;the maximum radial temperature of the brake disc and friction plate in the braking process was located on the central part of the friction zone,the temperature of the outside radius and inside radius was lower,the temperature of the axial direction decreased from the friction surface layer to the inner layer direction;it can reduce the maximum temperature value of friction deputy surface by increasing any thermal parameter of the brake or friction plate,but compared to the friction plate,the effect of thermal conductivity,specific heat capacity and density of brake disc was much greater than the effect of friction plate's on the temperature of the friction deputy,the research content can provide a reference for the structural design and material selection of brake.

Simulation Analysis on the Thermal Distortion and its Influencing Factors of Brake Disc

Analyzing Performance of Automobile Brake Drum in 3D Thermo-elastic Coupling Field

Theoretical Modeling and FEA of Thermo-mechanical Coupling Dynamics of Ventilated Disc Brake

Impacts of Initial SRO on Thermo-mechanical Coupling Characteristics of Disc Brake

Experimental Study on the Thermo-Mechanical Coupling Characteristic of Asymmetrical Disc Brake

Influences of Initial DTV on Thermomechanical Coupling Characteristics of Brake

Simulation of the Friction Temperature Field for Disc Brake

Modeling and Simulation of Brake Judder Considering the Effects of Thermo-Mechanical Coupling

Thermal-mechanical coupling analysis and optimization of mine hoist brake disc

Modeling and Analysis of the Brake Torque Variation Induced by Disc Side Face Run-Out

A Finite Element Method of Temperature Field of Airplane Braking Disc

Thermo-mechanical Coupling Simulation of Braking Process of Brake Disc

Simulation and Analysis of Thermal Fatigue Based on Imperfection Model of Brake Discs

Study on Simulation Methods for Disc Brake with FEM

Friction Modeling for Thermo-mechanical Coupling Characterization of Disc Brake

The thermo-mechanical coupling method of brake disc based on dynamic convective heat transfer

Sequentially coupled thermal-mechanical analysis of the brake disc used in air disc brake

Influencing factors analysis of thermal-mechanical coupled dynamics on hydraulic damper of automobile

A thermomechanical model for the analysis of disc brake using the finite element method in frictional contact

Analysis of Thermal-mechanical Coupling Behavior of Brake Disc of High Speed Trains Considering Thermal Contact Resistance

Impact of Curved Vents, Holes and Slots on Thermo-mechanical Behavior of Automobile Disc Brake - FEM Simulation and Validation