Abstract:For the same frequency, a vibrating screen usually can only achieve a circular or linear motion trajectory, which will lead to the phenomenon of screen clogging. The compound frequency vibrating screen can achieve various motion trajectories according to different frequency ratios, thus perfectly solving this problem. Thus, the multi-frequency control synchronization problem of the dual induction motor-driven vibration system based on the fixed speed ratio was studied. Firstly, by establishing an electromechanical coupled dynamics model of the vibration system driven by dual induction motors, the response equation of the fixed speed ratio vibration system was derived. Then, the master–slave control strategy was used to control the two induction motors through PID control optimized by a genetic algorithm. The slave motor tracked the main motor through the speed ratio method and achieved fixed speed ratio control synchronization. The simulation analysis showed that the two induction motors vibration system could not achieve self-synchronous motion with a fixed speed ratio, but by using the back propagation proportion-integral-derivative control (BP PID, PID based on BP neural network), we were able to achieve control synchronization with a fixed speed ratio. Herein, the arbitrariness of the fixed speed ratio parameter is also discussed, and controlled synchronous motion of the vibration system with a non-integer fixed speed ratio was realized. Finally, the simulation results were verified through experiments with the fixed speed ratio parameter n = 1.5, which verified the validity of the synchronization theory of fixed speed ratio control in vibrating systems and made it possible to apply it in compound frequency vibrating screens.

Design of Frequency Control System for Centrifuge in Multi-Parameter Combined Environmental Testing Device

Development of Centrifuge for Multi-Parameter Combined Environmental Test

Analysis on Dynamic Characteristics and Design of Centrifuge

Control of Temperature Uniformity in the Temperature Chamber with Centrifugal Acceleration

Design of Temperature Testing System in Multi-Parameter Combined Environmental Test

Paralleling Hydraulic Control of Variable Frequency Motor and Valve for the Swing Mechanism of Segment Erector

Modeling and Realization of Multiphase Permanent Magnet Synchronous Motor Variable Speed System

Design of Precise Centrifuge Testing System Based on Multi-thread

Rotor Vibration Control for Magnetic Suspended High-Speed Flywheel Energy Storage System with Inverse System Method and Extended 2-DOF PID Controller

The Vacuum Control System Design in Ultracentrifuge Chamber

Research of Sensorless Control for Multiphase Induction Motor Based on High Frequency Injection Signal Technique

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Precise and Robust Control of Permanent Magnet Linear Synchronous Motor in a High-Speed Feeding System

Design of Multi-speed Motor Control System Based on S7-1200 PLC and Frequency Converter

A V/Hz Based Maximum Torque Per Volt Control in Flux-Weakening Region for Interior Permanent Magnet Synchronous Motors

Automatic Control System for a High-speed Spin Tester

Drive System Design of CNC Gear Measurement Center Permanent Magnet Synchronous Motor

Design of Double-Fed Control System for J-Text 100 Mva Pulse Generator Unit

Simulation Analysis and Optimization Design of the Variable-Speed Constant-Frequency Doubly Fed Wind Power Generation Control System Based on PSCAD

Synchronization of Dual Induction Motor Multi-Frequency Control Based on Fixed Speed Ratio

A Converter-Based Starting Method and Speed Control of Doubly Fed Induction Machine with Centrifugal Loads