Abstract:During the pumping operation of concrete pump trucks, the swivel shaft primarily withstands a series of complex loads such as bidirectional bending moments and torque (stemming from the self-weight of the boom in the amplitude plane, the self-weight of the concrete; wind load and rotational inertia force in the rotation plane; torque from the delivery pipe and the concrete inside), as well as lateral wind load on the concrete and the impact vibration caused by the flow of concrete. These factors can easily lead to fractures due to the loads exceeding the material load limit of the swivel shaft. This study targets the swivel shaft fracture accidents during the construction process of concrete pump trucks, hypothesizing that the accidents occur due to improper installation angles of the swivel shaft (angle between the oil channel hole and the cylinder axis). Firstly, numerical simulation of the onsite conditions is conducted and compared with the results observed from the actual accidents. Secondly, by fixing the onsite conditions (keeping the boom posture unchanged), a 360° rotational simulation calculation of the fractured swivel shaft is performed to identify the relationship between high stress intervals and the swivel shaft rotation angle and the angle between the second variable oil cylinder axis. Finally, a full-condition calculation is conducted for the boom and the swivel shaft. The results indicate that the high stress area of the swivel shaft does not change with the swivel shaft rotation angle (when the boom is fixed) but is related to the position of the second variable oil cylinder axis and is symmetrically distributed around it. Therefore, adjusting the swivel shaft rotation angle to avoid the high stress area near the symmetry axis of the second variable oil cylinder can prevent the fracture accidents of the swivel shaft.

Study of Concrete Pump Truck Structural Health Monitoring

Optimal Sensor Placement for Health Monitoring of Boom Structure of Concrete Pump Truck

Study on Health Monitoring System Design of Cable-Stayed Bridge

Healthy monitoring and altering system on-line of bridge structures Ⅰ——Design for monitoring assessment,altering system and modules

Experimental research on monitoring system of concrete pump based on Zigbee and CAN bus technology

Application of soft sensor in structure health monitoring of truck-mounted concrete pump boom

Condition Monitoring Model of a Hydraulic System in Truck Crane

Study on Modeling and Simulation of Concrete Pump Hydraulic System

Concrete Cracks Monitoring of a Practical Bridge by Using Structural Health Monitoring Technique

Damage decoupling analysis of pump truck structure on multi-load

Health monitoring system of steel-tube arch bridge : design and implementation of a teaching demonstration platform

Review on hidden trouble detection and health diagnosis of hydraulic concrete structures

Monitoring a Post-Tensioned Concrete Box Girder Bridge with Cracks

Study on Bridge Structure Damage and Health Diagnosis Method Based on Health Monitoring

Design and Development of a New Type of Monitoring System in Pump Truck

Advances on Intelligent Health Monitoring for Hydraulic Steel Structures

ADVANCES IN STRUCTURAL HEALTH MONITORING SYSTEMS IN CIVIL ENGINEERING

Analysis of structural responses of bridges based on long-term structural health monitoring

Simulation analysis and prevention strategies for fatigue fracture of the swivel shaft in concrete pump trucks

Study on Analysis System for Boom of Truck Mounted Concrete Pump Based on MSC.Patran/Nastran

Real-Time Structural Monitoring of the Multi-Point Hoisting of a Long-Span Converter Station Steel Structure