Abstract:During the pumping operation of concrete pump trucks, the swivel shaft primarily withstands a series of complex loads such as bidirectional bending moments and torque (stemming from the self-weight of the boom in the amplitude plane, the self-weight of the concrete; wind load and rotational inertia force in the rotation plane; torque from the delivery pipe and the concrete inside), as well as lateral wind load on the concrete and the impact vibration caused by the flow of concrete. These factors can easily lead to fractures due to the loads exceeding the material load limit of the swivel shaft. This study targets the swivel shaft fracture accidents during the construction process of concrete pump trucks, hypothesizing that the accidents occur due to improper installation angles of the swivel shaft (angle between the oil channel hole and the cylinder axis). Firstly, numerical simulation of the onsite conditions is conducted and compared with the results observed from the actual accidents. Secondly, by fixing the onsite conditions (keeping the boom posture unchanged), a 360° rotational simulation calculation of the fractured swivel shaft is performed to identify the relationship between high stress intervals and the swivel shaft rotation angle and the angle between the second variable oil cylinder axis. Finally, a full-condition calculation is conducted for the boom and the swivel shaft. The results indicate that the high stress area of the swivel shaft does not change with the swivel shaft rotation angle (when the boom is fixed) but is related to the position of the second variable oil cylinder axis and is symmetrically distributed around it. Therefore, adjusting the swivel shaft rotation angle to avoid the high stress area near the symmetry axis of the second variable oil cylinder can prevent the fracture accidents of the swivel shaft.

Simulation analysis and prevention strategies for fatigue fracture of the swivel shaft in concrete pump trucks

Fatigue Life Prediction for Boom Structure of Concrete Pump Truck

Safety and stability analysis of the ship loader during shipping

The Performance Evaluation of Fracturing Pump Truck Engine's Supporting Beam

Fatigue Failure Analysis of Driving Rod in Screw Pumping Well

Damage decoupling analysis of pump truck structure on multi-load

Fracture Analysis of a Pulley Shaft for the Linear Motor Oil Pumping Unit in Western Oilfield of China

Component Structural Equivalent Research Based on Different Failure Strength Criterions and the Theory of Critical Distance

Pouring Characteristics Analysis on the Concrete Pump Truck Boom Based on Rigid-Flexible Coupling Method

FRACTURE ANALYSIS OF THE VARIABLE-SPEED MOTOR SHAFT OF THE GANTRY CRANE

Static Analysis of Mobile Pump Truck Frame for Four Typical Working Conditions

Numerical simulation of concrete pumping process and investigation of wear mechanism of the piping wall

Failure analysis and structural fatigue resistance design of multistage centrifugal pump shaft

Fatigue Cracking of Shoulder Beams and I-shaped Corbels Within Four-Limb CFST Columns

The rupture failure analysis of splined shaft in the 1400 fracturing pump's power end

Analysis of the Causes of Driving Gear Shaft Fractures in Gear Pumps

Finite element analysis and structural design of fracturing pump valve chamber under multiple working conditions

Study on the Laminated Frame Strength of Heavy-Duty Fracturing Pump Truck Considering Slip Effect

The Strength Analysis of Heavy Fracturing Truck under Multi-conditions

Simulation of the Boom of Concrete Boom Pump Truck Based on Multi-body Dynamics

Field Monitoring and Numerical Simulation Analysis of Deep Shaft Concrete Wall Support