Abstract:The spatiotemporal phase transformation during hot stamping would considerably effect the microstructure and mechanical properties of steels. In order to manufacture hot-stamping components of ultra-high-strength steel with tailored mechanical properties, the effect of the quenching time and the temperature of the die on the phase-transformation characteristics and mechanical property of ultra-high-strength steel was deeply studied. A finite element (FE) model coupled with a thermomechanical phase was employed to perform a succession of simulations for hot stamping corresponding to different quenching times and the temperatures of die, and the corresponding hot stamping experiments were performed. The 3D mapping surfaces of the temperature; quenching time; and three microstructures, namely austenite, bainite, and martensite, were constructed, and the mapping relationships in such surfaces were further explained by microstructural observations. Subsequently, based on the test results of the mechanical properties, the relationship curves of hardness and tensile strength, hardness, and elongation at break were fitted respectively, and then the 3D mapping surfaces were constructed for hardness, tensile strength, and elongation at break, which varied with the temperature die and quenching time. Finally, the quenching parameters of the automobile B-pillar were designed according to the constructed mapping relationship, and the hot-stamping FE simulation of the automobile B-pillar was developed. The result shows that those constructed mapping surfaces are helpful for adjusting the local mechanical property of the steels by designing the parameters.

Crush Performance of Top-Hat Tubular Structures Considering Different Forming Conditions

Steel-aluminum Plastic Clinching of an Inclined Wall Die

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Die Structure Analysis Of Stress Distribution During High-Strength Steel Stamping Process And Experimental Validation

Hybrid Corrugated Members Subjected to Impact Loading: Experimental and Numerical Investigation

A Tailored Preparation Method of Variable Strength for Ultra-High-Strength Steel Sheet and Mapping Mechanism between Process and Property

On the Fracture Possibility of Thin-Walled Tubes under Axial Crushing

Investigation into the Hot-Forming Limit for 22MnB5 Hot-Forming Steel under a Stamping Process

A forming limit framework accounting for various failure mechanisms: localization, ductile and cleavage fracture

A Theoretical Analysis for the Dynamic Axial Crushing Behaviour of Aluminium Foam-Filled Hat Sections

Optimal Crashworthiness Design of a Spot-Welded Thin-Walled Hat Section

Structural design of stamping die of advanced high-strength steel part for automobile based on topology optimization with variable density method

Quasi-static crushing behaviors and plastic analysis of thin-walled triangular tubes

Springback and longitudinal bow in chain-die forming U and hat channels

Quantitative Evaluation of Tool Wear in Cold Stamping of Ultra-High-Strength Steel Sheets

Analysis of the crushing behaviors of woven carbon fiber reinforced plastic hat section component under dynamic bending and axial crushing loading

Influence of hot forming on microstructure and mechanical properties of laser tailor-welded dissimilar ultra-high-strength steels

Deformation characteristics and fracture failure of multi-bosses forming process by plate forging

Crashworthiness Analysis of Self-Similar Nested Hierarchical Hexagonal Tubes

STUDY OF FAILURE CRITERION OF ADVANCED HIGH STRENGTH STEEL

Effect of Cold and Hot Compounds Forming on Microstructures and Mechanical Properties in the Deformation Zone of Sharp-Edged High-Strength Steel Sections