Abstract:Mesostructured silica SBA-15 materials with different structural parameters, such as pore size, pore volume, and wall thickness, etc., were prepared by varying the postsynthesis hydrothermal treatment temperature and adding inorganic salts. The hydrothermal stabilities of these materials in steam (100% water vapor) were systematically investigated using a variety of techniques including powder X-ray diffraction, transmission electron microscopy, nitrogen sorption, and (29)Si solid-state NMR. The effect of the pore size, microporosity or mesoporosity, and wall thickness on the stability was discussed. The results show that all of the SBA-15 materials have a good hydrothermal stability under steam of 600 degrees C for at least 24 h. N(2) sorption measurements show that the Brumauer-Emmett-Teller surface area of SBA-15 materials is decreased by about 62% after treatment under steam at 600 degrees C for 24 h. The materials with thicker walls and more micropores show relatively better hydrothermal stability in steam of 600 degrees C. Interestingly, we found that the microporosity of the mesostructured silica SBA-15 is a very important factor for the hydrothermal stability. To the materials with more micropores, the recombination of Si-O-Si bonds during the high-temperature steam treatment may not cause direct destruction to the wall structure. As a result, SBA-15 materials with more micropores show better stability in pure steam of 600 degrees C. Nevertheless, these materials are easily destroyed in steam of 800 degrees C for 6 h. Two methods to effectively improve the hydrothermal stability are introduced here: one is a high-temperature treatment, and another is a carbon-propping thermal treatment. Thermal treatment at 900 degrees C can enhance the polymerization degree of Si-O-Si bonds and effectively improve the hydrothermal stability of these SBA-15 materials in 800 degrees C steam for 12 h. But, this approach will cause very serious shrinkage of the mesopores, resulting in smaller pore diameter and low surface area. A carbon-propping thermal treating method was employed to enhance the polymerization of Si-O-Si bonds and minimize the serious shrinkage of mesopores at the same time. It was demonstrated to be an effective method that can greatly improve the hydrothermal stability of SBA-15 materials in 800 degrees C steam for 12 h. Furthermore, the SBA-15 materials obtained by using the carbon-propping method possess larger pores and higher surface area after the steam treatment at 800 degrees C compared to the materials from the direct thermal treatment method after the steam treatment.

Observation on the Structure of Ordered Mesoporous Materials at High Temperature Via in Situ X-Ray Diffraction

Deformation of Ordered Mesoporous Silica Structures on Exposure to High Temperatures

In-situ Growth of ZSM-5 Crystals on the Surface of High Temperature Alloy Substrates

Direct Observation Of The Mesopores In Zsm-5 Zeolites With Hierarchical Porous Structures By Laser-Hyperpolarized Xe-129 Nmr

Temperature-Driven Structural Evolution during Preparation of MCM-41 Mesoporous Silica

Direct Observation of Nanorange Ordered Microporosity Within Mesoporous Molecular Sieves

The effect of hydrothermal temperature on the properties of SBA-15 materials

Understanding Effect of Wall Structure on the Hydrothermal Stability of Mesostructured Silica SBA-15.

High-temperature Synthesis of Ordered Mesoporous Silicas from Solo Hydrocarbonsurfactants and Understanding of Their Synthetic Mechanisms

Structure and thermal stability of mesostructured zirconium oxophosphates

Effect of Crystallization Temperature on Structure and Morphology of Mesoporous SBA-15

Understanding of the High Hydrothermal Stability of the Mesoporous Materials Prepared by the Assembly of Triblock Copolymer with Preformed Zeolite Precursors in Acidic Media

Atomic-level Sintering Mechanism of Silica Aerogels at High Temperatures: Structure Evolution and Solid Thermal Conductivity

High-temperature synthesis of stable ordered mesoporous silica materials using mesoporous carbon as a hard template

Highly hydrothermal stability of ordered mesoporous aluminosilicates Al-SBA-15 with high Si/Al ratio

On the High-Pressure Behavior of Periodic Mesoscale SBA-16 Silica/carbon Composites: Studies at 10 GPa Between 25 and 1800 °C

Transition from 2D to 3D SBA-15 by High-Temperature Fluoride Addition and its Impact on the Surface Reactivity Probed by Isopropanol Conversion

Extensive Inspection of an Unconventional Mesoporous Silica Material at All Length-Scales

Design and Synthesis of Ordered Mesoporous Silica Materials with High Degree of Silica Condensation at High Temperature from a Mixture of Polymer Surfactant with Small Organic Ammonium.

In-situ heating study on the structural change of surfactant-templated germanium oxide mesostructure.

Large intraparticle mesoporosity of hierarchical ZSM-5 synthesized from kaolin using silicalite seed: effect of aging time and temperature