Abstract:In ocean environment, the ship motion significantly affects the natural circulation behavior in ship-based integrated-type reactor. This paper theoretically and experimentally investigated natural circulation characteristics in symmetrical loops under rolling condition. Experiments were carried out on a test loop with a symmetrical configuration by simulating the structure of an accrual reactor. The theoretical results revealed that only angular acceleration contributes to the resultant force under zero power rolling condition. In a closed circuit with a uniform cross-section area, the angular acceleration force integral is proportional to the angular acceleration and the area enclosed by the circuit. The integral value varies over time and causes flow oscillations. However, the angular acceleration force does not influence the flow status in the shared part of the two symmetrical neighbor circuits due to force interactions. Rolling experiments with a zero power load confirmed these results. Full power experiments under rolling condition exhibited observable flow rate and temperature oscillations in each branch of the flow channel. The oscillations in the side flow channels had the same values for both the period and the phase with the variation of rolling angle. The angular acceleration force was the main cause of this. The oscillations in the middle channel had a period half the value of the rolling period. The periodical variation of the vertical component of gravity caused this. The horizontal component of gravity was out-phasing with angular acceleration. Therefore, it alleviated oscillation in the side channels. The experimental results showed that for the same rolling period, as the rolling angle increased, the average flow rate decreased and oscillation amplitudes increased. Also, as the power load increased, the oscillations in the middle channel increased and the oscillation in the side channel decreased.

Experimental Research on Effect of Rolling on Natural Circulation Flow and Heat Transfer

Experimental and Theoretical Study on Natural Circulation Flow under Rolling Motion Condition

Heat Transfer Model of Single-Phase Natural Circulation Flow under A Rolling Motion Condition

Effect of Rolling on the Flowing and Heat Transfer Characteristic of Turbulent Flow in Sub-Channels

Research on Single-Phase Forced Circulation in Rectangular Channel Flow Characteristics under Rolling Conditions

Experimental Research of Effect of Rolling Motion on NaturalCirculation Capacity for Passive Residual Heat Removal System

Experimental Study on Thermal Hydraulic Characteristics of Natural Circulation Loop under Motion Condition

Experimental Study on Flow Characteristics of Natural Circulation Experimental Loop Under Rolling Condition With Zero Power

Characteristic Of Natural Circulation Temperature Fluctuation Under Rolling Motion Condition

Experimental Study on Heat Transfer Characteristics of LBE Flow in a Vertical Tube under Static and Rolling Conditions

EFFECT OF ROLLING MOTION ON FLOW INSTABILITY OF PARALLEL RECTANGULAR CHANNELS OF NATURAL CIRCULATION

Roller's Deformation Analysis under Different Thermal and Mechanical Conditions

Mathematical Analysis of Heat Transfer Characteristics of Laminar Flow in a Rectangular Channel in Rolling Motion

Numerical Analysis of Turbulent Flow in Subchannels under Rolling Motion Condition

Effect of Rolling Motion on Flow Instability of Natural Circulation

Study on Flow and Heat Transfer Characteristics of Supercritical CO2 Inside Horizontal Tube under Ocean Rolling Condition

Experimental Research on Natural Circulation Complex Oscillations under Rolling Motion Conditions

Experimental Investigation of Natural Circulation in A Symmetrical Loop under Large Scale Rolling Motion Conditions

Effect of Rolling Motion on Laminar Temperature Profile in Tubes

Experimental Study on Two-Phase Flow Instability of Natural Circulation under Rolling Motion Condition

Cfd Analysis Of Cross Flow In Rod Bundles Under Rolling Motion