Abstract:Purpose The performance of solid fins inside a differentially heated cubical cavity is numerically studied in this paper. The main purpose of the study is to make an optimization to reach the maximum heat transfer in the enclosure having the solid fins with studied parameters. Design/methodology/approach The considered domain of interest is a differentially heated cube having heat-conducting solid fins placed on the heated wall while an opposite wall is a cooled one. Other walls are adiabatic. Governing equations describing natural convection in the fluid filled cube and heat conduction in solid fins have been written using non-dimensional variables such velocity and vorticity taking into account the Boussinesq approximation for the buoyancy force and ideal solid/fluid interfaces between solid fins and fluid. The formulated equations with appropriate initial and boundary conditions have been solved by the finite difference method of the second of accuracy. The developed in-house computational code has been validated using the mesh sensitivity analysis and numerical data of other authors. Analysis has been performed in a wide range of key parameters such as Rayleigh number (Ra = 10 4 –10 6 ), non-dimensional fins length (l = 0.2–0.8), non-dimensional location of fins (d = 0.2–0.6) and number of fins (n = 1–3). Findings From numerical methods point of view the used non-primitive variables allows to perform numerical simulation of convective heat transfer in three-dimensional (3D) regions with two advantages, namely, excluding difficulties that can be found using vector potential functions and reducing the computational time compared to primitive variables and SIMPLE-like algorithms. From a physical point of view, it has been shown that using solid fins can intensify the heat transfer performance compared to cavities without any fins. Fins located close to the bottom wall of the cavity have a better heat transfer rate than those placed close to the upper cavity surface. At high Rayleigh numbers, increasing the fins length beyond 0.6 leads to a reduction of the average Nusselt number, and one solid fin can be used to intensify the heat transfer. Originality/value The present numerical study is based on hybrid approach for numerical analysis of convective heat transfer using velocity and vorticity that has some mentioned advantages. Obtained results allow intensifying the heat transfer using solid fins in 3D chambers with appropriate location and length.

Finite Element Analysis of Fin Effect on Buoyancy Convection of Air Enclosed in a Complex Square Cavity

Numerical analysis of the hot fin's width effect on natural convection of air enclosed in a 2D complex square cavity

Numerical simulation of natural convection in a differentially heated cubical cavity with solid fins

Finite element analysis of natural convection of air in a 2D complex square cavity with four kinds of ripplet

Numerical simulation of flow instability and heat transfer of natural convection in a differentially heated cavity

The Application of a Second-order and Full-extension ETG Finite Element Method for the Simulation of Natural Convection in a Square Cavity

Numerical Exploration of Turbulent Air Natural-Convection in a Differentially Heated Square Cavity at Ra = 5.33 × 10 9

Numerical Simulation of Natural Convection and Heat Transfer of Water in Cavities

Natural Convection Heat Transfer along Vertical Cylinder Heat Sinks with Longitudinal Fins

High-resolution High-Order Upwind Compact Scheme-Based Numerical Computation of Natural Convection Flows in a Square Cavity

Numerical investigation of double-diffusive convection in rectangular cavities with different aspect ratio I: High-accuracy numerical method

Numerical Computation of Laminar Natural Convection Heat Transfer Around a Horizontal Compound Tube with External Longitudinal Fins

Large Eddy Simulation and Experimental Study of Turbulent Mixed Convection Inside a Cavity with Large Rayleigh Number: Effect of Buoyancy

Numerical simulation of magnetohydrodynamics double-diffusive natural convection in a cavity with non-uniform heated walls

Numerical analysis of double-diffusive free convection in a curvilinear cavity filled with nanofluid and triple fins attached to the hot walls

Three Dimensional Finite Element Analysis for Rayleight-Benard Convection in Rectangular Enclosures

Numerical Investigation of the First Bifurcation for Natural Convection of Fluids Enclosed in a 2D Square Cavity with Pr Lower Than 1.0

Convection in a differentially heated cavity with a conducting fin attached at the bottom and ceiling

A Numerical investigation of Two Critical Conditions for the First Steady Bifurcation of Natural Convection Flow of Air Enclosed within Rectangular Cavities

Multi-objective optimization of porous fins in closed cavity with heat source of sinusoidal periodic temperature boundary condition

Three-Dimensional Numerical Simulation on the Laminar Flow and Heat Transfer in Four Basic Fins of Plate-Fin Heat Exchangers