Abstract:In vessel retention (IVR) is one of the key severe accident mitigation strategies to maintain reactor pressure vessel (RPV) integrity. IVR designs utilize the reactor pressure vessel lower head to contain molten fuel and rely on external reactor vessel cooling (ERVC) to remove decay heat. The capacity of ERVC is limited by the critical heat flux (CHF) of flow boiling on the outside of the reactor vessel surface. Therefore, the determination of critical heat flux (CHF) is crucial to predict whether the adoption of IVR would be successful in mitigating severe accidents. In 1999, Celeta et.al proposed a superheated layer vapor replenishment model. In this model they postulated that CHF would occur when the superheated layer was occupied by the vapor blanket coming into contact with the heated wall and they successfully predicted the critical heat flux in subcooled water flow boiling under high mass flux, high liquid subcooling and low/medium pressure conditions. To evaluate the practicability of this model in predicting CHF under IVR conditions, CHF experiments were performed under natural circulation conditions on the experiment facility "Test of External Vessel Surface with Enhanced Cooling" (TESEC). Experiments are conducted in a 30 mm wide, 61mm high rectangular flow channel with a 200 mm long heated surface along the flow direction. Two quartz windows are installed at the sidewalls of the flow channel for visualization. In order to simulate various positions of the reactor lower head, experiments at different inclination angles of the test section were conducted. The high speed visualization data at CHF point at various inclination angles were processed and analyzed by a MATLAB code developed by the author. The vapor blanket thickness at various inclination angles was measured from the visualization data and was also predicted by the Celeta model. By using geometry data from high speed images, CHF values were calculated by Celeta model and compared with the experimental results at various inclination angles. Limitations of the Celeta model in adaptation of predicting CHF under IVR conditions were further discussed.

Relap Simulation on Boiling and Flow Phenomena under External Reactor Vessel Cooling Condition

RELAP Simulation on the Non-heating Experiment under the External Reactor Vessel Cooling Condition

EXPERIMENTAL INVESTIGATION ON BOILING FLOW CHARACTERISTICS UNDER PASSIVE IVR-ERVC CONDITIONS

A Theoretical and Experimental Study on Subcooled Flow Boiling under Passive IVR-ERVC Conditions

An Experimental Study on Natural Circulation Flow Characteristics under Passive IVR-ERVC Conditions

Study on External Reactor Vessel Cooling Capacity for Advanced Large Size PWR

Simulation and Analysis on REPEC Heating Experimental Mechanism

Non-Heating Experimental Study on External Reactor Vessel Cooling

The Influence of Flooding Water Level on Cooling Limit of RPV Outer Wall under ERVC Conditions

Safety Research of IVR-ERVC for Advanced Water Cooled Reactor

Influences of Some Engineered Factors on IVR-ERVC Limits

CHF experiments and prediction model under subcooling flow boiling condition in passive IVR-ERVC system

Numerical Investigation on the Thermal-Hydraulic Characteristics near a Corroded Lower Head of the Reactor Vessel During IVR-ERVC

Experimental Research on Influence of Real Surface Material and Aging Effect on ERVC-CHF of RPV

In- and Ex-Vessel Coupled Analysis of IVR-ERVC Phenomenon for Large Scale PWR

Study of natural convection heat transfer in molten pool for advanced large size PWR

Experimental Research for CHF Sensitivity of Heat Flux Distribution under IVR Conditions

Critical Heat Flux Experiments for IVR-ERVC Strategy under the Pool Boiling Condition

Experimental Investigation of 3-D ERVC Process for IVR Strategy – CHF Limits and Visualization of Boiling Phenomena

Prediction Of subcooled water flow boiling critical heat flux (CHF) at low pressure

Experimental Investigation on Critical Heat Flux of IVR-ERVC System under the Natural Circulation Condition