Abstract:Unlike pulverized coal, biomass particles are neither small enough to neglect internal temperature gradients nor equant enough to model as spheres. Experimental and theoretical investigations indicate particle shape and size influence biomass particle dynamics, including essentially all aspects of combustion such as drying, heating, and reaction. This chapter theoretically and experimentally illustrates how these effects impact particle conversion. Experimental samples include disc/flake-like, cylindrical/cylinder-like, and equant (nearly spherical) shapes of wood particles with similar particle masses and volumes but different surface areas. Small samples (320 gm) passed through a laboratory entrained-flow reactor in a nitrogen atmosphere and a maximum reactor wall temperature of 1,600 K. Large samples were suspended in the center of a single-particle reactor. Experimental data indicate that equant particles react more slowly than other shapes, with the difference becoming more significant as particle mass or aspect ratio increases and reaching a factor of two or more for particles with sizes over 10 mm. A one-dimensional, time-dependent particle model simulates the rapid pyrolysis process of particles with different shapes. The model characterizes particles in three basic shapes (sphere, cylinder, and flat plate). With the particle geometric information (particle aspect ratio, volume, and surface area) included, this model simulates the devolatilization process of biomass particles of any shape. Model simulations of the three shapes show satisfactory agreement with the experimental data. Model predictions show that both particle shape and size affect the product yield distribution. Near-spherical particles exhibit lower volatile and higher tar yields relative to aspherical particles with the same mass under similar conditions. Volatile yields decrease with increasing particle size for particles of all shapes. Assuming spherical or isothermal conditions for biomass particles leads to large errors at most biomass particle sizes of practical interest.

MODIFIED RANDOM PORE MODEL TO EXPRESS THE COMBUSTION CHARACTERISTICS OF BIOMASS

Simulation of Biomass Pyrolysis in a Rotary Drum by Coupling CFD-DEM with a One-Dimensional Thermally Thick Model

The Combustion Reactivity of Coal Chars in Oxyfuel Atmosphere: Comparison of Different Random Pore Models

Modified random pore model study on coal char reactions under O 2/CO 2 atmosphere

Study on Coal Chars Combustion under O2/CO2 Atmosphere with Fractal Random Pore Model

Modelling the Combustion of Thermally Thick Biomass Particles

Nonisothermal Thermogravimetric Kinetic Investigations On Combustion Behaviors Of Concomitant Biomass From Urban Plants

Application Of A Class Of Pore Model To Char Combustion At Kinetic-Controlled Reation

Kinetics of Coal Char Combustion with Random Pore Model under O2/CO2 Atmosphere

Characterisation and Double Parallel Random Pore Model Fitting Kinetic Analysis of Faulty Coal Oxygen-Enriched Co-Combustion

Biomass Combustion Characteristics And Implications For Renewable Energy

Analysis of model dimensionality, particle shrinkage, boundary layer reactions on particle-scale modelling of biomass char conversion under pulverized fuel combustion conditions

Modeling of the Pore Structure Evolution in Porous Char Particles During Combustion

Experimental Study on Pore Structure and Apparent Kinetic Parameters of Char Combustion in Kinetics-Controlled Regime

Combustion Details of Raw and Torrefied Biomass Fuel Particles with Individually-Observed Size, Shape and Mass

Investigation of Co-Pyrolysis of Coals and Biomass by Boltzmann-Monte Carlo-Percolation (BMCP) Model

Numerical Modeling of Fixed-Bed Cocombustion Processes Through the Multiple Thermally Thick Particle Model.

Study on Nonlinear Characteristics of Coal Char Reaction under High Temperatures

Kinetic Model Study on Biomass Pyrolysis and CFD Application by Using Pseudo-Bio-cpd Model

Simulation Analysis of Biomass Pyrolysis Based on the Improved Chemical Percolation Devolatilization Model with Chain Reaction Dynamics

Development of multi-scale pyrolysis and combustion model for fir wood