Abstract:Anthropogenic release of tritium from nuclear facilities is expected to increase significantly in the coming decades, which may cause radiation exposure to humans through the contamination of water and food chains. It is necessary and urgent to acquire detailed information about tritium in various environments for studying its behavior and assessing the potential radiation risk. In the atmosphere, although the passive sampling technique provides a low-cost and convenient way to characterize the dynamics of tritiated water vapor (HTO), a single, simple sampler configuration makes it difficult to collect sufficient and representative samples within the expected period from different environments. In this study, we systematically studied the impacts of sampler configurations on sampling performance and proposed a modifiable sampler design by scaling sampler geometry and adjusting absorbent to achieve different monitoring demands. The samplers were subsequently deployed at five sites in China and Germany for the field calibration and the measured results exhibited a good agreement between the adsorption process obtained in sites corrected with diffusion coefficient and the one calibrated in Shanghai. This suggests the feasibility of predicting sampling performance in the field based on known data. Finally, we developed a strategy for sampler modification and selection in different environments and demonstrated that using easily obtainable environmental data, our sampler can be optimized for any area without any time-consuming preliminary experiments. This work provides a scientific basis for establishing high-resolution atmospheric HTO database and expands the conventional empirical sampler design paradigm by demonstrating the feasibility of using quantitative indices for sampler performance customization.

Application of Model MTS5 Dew-Point Meter in Gas Sampling and Analyzing System of HTR-10

Study of analysis method of trace water in small-vessel gas at normal pressure

Helium Sampling and Analyzing System of 10MW High Temperature Gas-Cooled Reactor

DESIGN OF THE GAS SAMPLING AND ANALYZING SYSTEM OF HTR-PM

Research on Water Vapor Release and Adsorption Mechanism to Improve the Measurement of Dew Point Humidity Sensor

Simultaneous Online Measurement of H 2 O and CO 2 in the Humid CO 2 Adsorption/Desorption Process

Simultaneous Online Measurement of H2O and CO2 in the Humid CO2 Adsorption/Desorption Process

A New Passive Sampler for Collecting Atmospheric Tritiated Water Vapor

Measurement and Sampling Techniques Verification for an Online Gaseous Tritium Monitoring Method

Purification of helium gas for the helium test loop

A high-reliability thermocouple temperature-measuring unit applicable to the 10-MW high-temperature gas-cooled reactor

A KIND OF STEAM MOISTURE MEASURING METER AND ITS PERFORMANCE ANALYSIS

The R&D of Htgr High Temperature Helium Sampling Loop: from Htr-10 to Htr-Pm

Development and calibration of a modifiable passive sampler for monitoring atmospheric tritiated water vapor in different environments

Development and Qualification of a VH-TDMA for the Study of Pure Aerosols

Design of the Online Gross Γ Monitoring Instrument at the Exit of the Helium Purification System in HTR-PM

The design and thermohydraulics study of the HTR-10 High Temperature Helium Experimental Loop

Design, Operation And Maintenance Of Thermal Hydraulic Instrumentation System Of Htr-10

The Thermohydraulics and Dynamics Study of the HTR-10 High Temperature Helium Experimental Loop

Experimental analysis of the air humidification process for humid air turbine cycle using a two-phase measurement system

Study on Implementation Methods for Butanone Gas Detection under Circumstance of High Humidity