Abstract:Saturated soil shear strength is a primary factor that reflects the driving resistance of agricultural machinery in paddy soils. The determination of soil shear strength indicators, such as cohesion and internal frictional angle, is crucial to improve the walking efficiency of agricultural machinery in paddy soils. However, the measurement of these indicators is often costly and time-consuming. Soil moisture content, density, and clay content are crucial factors that affect the cohesion and internal friction angle, while very limited studies have been performed to assess the interactive effects of the three factors on soil shear characteristics, especially on paddy soils. In this study, eight soil samples were taken from eight paddy fields in Southeastern China, and the central composition rotatable design was used to classify the soil samples into five levels based on different clay content (X1), moisture content (X2), and density (X3). The direct shear tests were carried out indoors on the remolded paddy soil using a self-made shear characteristic measuring device. Then, both individual and interactive effects of X1, X2, and X3 on soil cohesion and internal friction angles on paddy soils were systematically investigated and analyzed using the regression analysis method in the data processing software Design-Expert. Our results indicated that the effects of the three environmental factors on soil cohesion were in the order of X1 > X2 > X3, while the order was X2 > X3 > X1 for the impact on internal friction angle. The interactive effects were in the order of X1X2 > X1X3 > X2X3 for cohesion and X1X2 > X2X3 > X1X3 for internal friction angle. Two prediction models were successfully established to quantify the soil cohesion and internal friction angle as affected by soil physical properties, and the coefficient of determination (R2) was 0.91 and 0.89 for the two equations, respectively. The model validations using new soil samples suggested that the models were capable of predicting the shear characteristic parameters under different physical parameters effectively, with errors between predicted and measured soil shear strength indicators within 15% and relative root mean square error less than 11%.

Influence of chemical action of water-soil on soil shear strength

Effect of Traffic Load on Permeability of Remolded Kaolin

Effects of Cation Adsorption on Properties of Silt Clay and Mixed Dredged Soil

VARIATION OF THE SHEAR STRENGTH OF XIAMEN UNSATURATED RESIDUAL SOILS WITH WATER CONTENT

Estimation of Soil Shear Strength Indicators Using Soil Physical Properties of Paddy Soils in the Plastic State

Hypoplastic model for road base coarse-grained materials accounting for temperature effect

Effects of Soil–Water Interaction on the Mechanical Behaviors of Shear-Zone Soils

COUPLING EFFECTS OF INITIAL SHEAR STRESS AND LOADING RATE ON STRENGTH BEHAVIORS OF SATURATED SOFT CLAY

The Influence and Spatial Variability of Main Mineral Composition of Chinese Loess on Soil Corrosion Resistance

Influence Mechanism of Water Content and Compaction Degree on Shear Strength of Red Clay with High Liquid Limit

Experimental Study on the Correlation Between Shear Characteristic and Physical Parameters of Paddy Soil in Plastic State

Study on the Strength of Expansive Soil Based on Water Content and Dry Wet Cycle

Characterization of Bonding between Asphalt Concrete Layer under Water and Salt Erosion

An experimental case study of a high-liquid-limit lateritic soil with its application in road construction

Experiment and Improvement Mechanism Analysis on the Mechanical Properties of Improved Chlorine Saline Soil

Effective Stress and Shear Strength Parameters of Unsaturated Soils As Affected by Compaction and Subsequent Shearing

Experimental study on Atterberg limits and shear strength properties of saline clay based on microscopic pore characteristics

Effects of the soil water content and relative roughness on the shear strength of silt and steel plate interface

Influence on strength characteristic of pile-soil composite with different moisture content

Consideration of Different Soil Properties and Roughness in Shear Characteristics of Concrete–Soil Interface

Performance Evaluation and Modification Mechanism of Red Clay Treated with Lignosulfonate