Comparation on the methods of removing impurity metals from copper powder of waste printed circuit boards
Weifeng Liu,Xiaoli Hu,Rui Jia,Duchao Zhang,Lin Chen,Tianzu Yang
DOI: https://doi.org/10.1016/j.jclepro.2022.131295
IF: 11.1
2022-05-01
Journal of Cleaner Production
Abstract:Copper powder of waste printed circuit boards (WPCBs), an important secondary metal resource, is usually processed by copper concentrate pyrometallurgy system to recover valuable metals. However, metals such as Pb, Sn, Zn and Al in copper powder of WPCBs are harmful to copper smelting system. Therefore, a two-stage leaching process was proposed to remove impurity metals from copper powder, and different routes were screened. Copper powder was firstly leached in the hydrochloric acid to remove Al, and then the Al-removed residue was treated to recover Sn and Pb by two routes, i.e., acid oxidation leaching or alkaline pressure oxidation leaching, respectively. The results showed that more than 97.15% of Al in copper powder was removed by the hydrochloric acid leaching. In HCl system adding H2O2, the leaching ratios of Pb and Sn reached 91.07% and 94.67%, respectively. In the alkaline pressure oxidation leaching system, the leaching ratios of Pb and Sn were 86.63% and 93.80%, respectively. In general, the separation and recovery of valuable metal resources in the WPCB copper powder were realized, and Cu was further enriched, providing high-quality raw materials for copper pyrometallurgy.
environmental sciences,green & sustainable science & technology,engineering, environmental