Abstract:A considerable number of deep engineering cases show that strain rockbursts occur on both sidewalls of circular caverns and ultimately form a symmetrical V-shaped notch. To investigate the occurrence process and mechanism of strain rockbursts in deep circular cavern under high stresses, simulation experiments under four different three-dimensional (3D) stress conditions were conducted on cubic granite specimens with a prefabricated circular hole using the true-triaxial electro-hydraulic servo mutagenesis testing system. The rock bursting process was monitored on the sidewalls of the hole and recorded in real-time with a wireless microcamera. The results show that the entire rock bursting process on the sidewalls can be divided into four distinct periods for every 3D stress condition: calm period, pellet ejection period, rock fragment exfoliation period, and rock bursting period. Under the conditions that the vertical stress is constant and the horizontal radial stress is equal to the horizontal axial stress, the rockburst severity of the sidewalls clearly decreases with increasing horizontal stress. When the vertical stress is constant and the horizontal axial stress is low, the rockburst severity clearly decreases with the increase of horizontal radial stress. In contrast, when the horizontal axial stress is high, the rockburst severity becomes more serious with increasing horizontal radial stress. During the process of rock fracture and bursting, the damage zones on both sidewalls form two symmetrical V-shaped notches, and the line connecting the centres of the two V-shaped notches is perpendicular to the maximum principal stress direction. The symmetrical V-shaped failure modes on both sidewalls under the four stress conditions are in line with the statistical relationship of the far-field stress state and failure mode of a deep circular cavern without support (Martin et al. in Can Geotech J 36(1):136–151, 1999).

SEISMIC RESPONSE OF A LARGE UNDERGROUND ROCK CAVERN GROUPS CONSIDERING DIFFERENT INCIDENT ANGLES OF EARTHQUAKE WAVES

DYNAMIC NONLINEAR RESPONSE OF A LARGE UNDERGROUND ROCK CAVERN SUBJECTED TO SEISMIC MOTION CONSIDERING WAVE PASSAGE EFFECT

Random seismic response analysis of large-scale underground caverns

3-D seismic response study on large scale underground group caverns

Three-dimensional (3D) dynamic finite element modeling of the effects of a geological fault on the seismic response of underground caverns

Dynamic Responses of U-Shaped Caverns under Transient Stress Waves in Deep Rock Engineering

Influence of Cavern Space on Stability of Large Cavern Groups under Earthquakes

Stability Analysis of Jointed Rock Mass in Large Underground Caverns Based on Multi-Scale Analysis Method

Effects of External Dynamic Disturbances and Structural Plane on Rock Fracturing Around Deep Underground Cavern

Failure mechanism of rock masses with complex geological conditions in a large underground cavern: A case study

Influence of Incident Orientation on the Dynamic Response of Deep U-Shaped Cavern Subjected to Transient Loading

Seismic responses of an underground tunnel in consideration of rock-tunnel interaction

Feasibility study on seismic resistance of soft seismic absorption layer for large rock cavern

Sensitivity Analysis of the Influences of Rock Mechanical Parameters on the Deformation of Underground Caverns

Stability Analysis and Failure Mechanism of the Steeply Inclined Bedded Rock Masses Surrounding a Large Underground Opening

Design of Test Platform for Coupling Field of Rock Stress and Seepage in Underground Storage Cavern

Experimental Investigation of Strain Rockburst in Circular Caverns under Deep Three-Dimensional High-Stress Conditions

Influence of cavern spacing on the stability of large cavern groups in a hydraulic power station

Seismic energy response and damage evolution of tunnel lining structures

Stability analysis of the surrounding rock of underground water-sealed oil storage caverns based on microseismic monitoring during construction

Scattering of SH waves by elliptical cavity and type-III crack in deep anisotropic geology