Influence of Incident Orientation on the Dynamic Response of Deep U-Shaped Cavern Subjected to Transient Loading

Lisha Liang,Xibing Li,Zhixiang Liu,Siyu Peng
DOI: https://doi.org/10.3390/math12121786
IF: 2.4
2024-06-08
Mathematics
Abstract:In deep rock engineering, caverns are often disturbed by engineering loads from different directions. To investigate the dynamic response of deep U-shaped caverns under different incident orientations, a theoretical solution of the dynamic stress concentration factor along the cavern boundary was derived based on the wave function expansion and conformal mapping method, and the failure characteristics around the cavern were further investigated by PFC2D (Particle Flow Code in two dimensions). As the incident orientation increases from 0° to 90°, the dynamic compressive stress concentration area transforms from both the roof and the floor to the sidewalls, and the peak dynamic stress concentration factor of the roof decreases from 2.98 to −0.20. The failure of the floor converts from dynamic compression shear failure to dynamic tensile failure. Compared to a stress wave incident from the curved boundary, a stress wave incident from the flat boundary causes severer damage. When the stress wave is incident from the sidewall, the cavern with a larger height-to-width (h/w) ratio exhibits severer damage. Conversely, the cavern with a smaller h/w ratio tends to fail as the stress wave is incident from the floor. This paper provides a basic understanding of dynamic responses of the deep U-shaped cavern.
mathematics
What problem does this paper attempt to address?
The paper mainly explores the impact of transient loads from different incident directions on the dynamic response of deep U-shaped chambers. ### Research Background and Objectives - **Research Background**: In deep rock engineering, chambers are often disturbed by engineering loads from different directions. Understanding how these disturbances affect the stability of the chambers is crucial for ensuring the safety of related underground projects. - **Specific Issue**: The paper aims to study the dynamic response of deep U-shaped chambers and the failure characteristics of the surrounding rock mass under transient loads (such as stress waves) from different incident angles. ### Research Methods and Findings - **Theoretical Analysis**: Based on the wave function expansion method and conformal mapping method, the theoretical solution of the dynamic stress concentration factor on the chamber boundary was derived. - **Numerical Simulation**: Using the 2D particle flow code PFC2D, numerical simulations were conducted to further study the failure characteristics around the chamber under different incident angles. - **Main Findings**: - When the incident angle increases from 0° to 90°, the dynamic compressive stress concentration area shifts from the top and bottom of the chamber to the sidewalls. - The failure mode of the chamber floor changes from dynamic compressive shear failure to dynamic tensile failure. - Stress waves incident from a plane boundary cause more severe damage than those incident from a curved boundary. - For chambers with different height-to-width ratios (h/w), when stress waves are incident from the side, chambers with a larger h/w ratio exhibit more severe damage; conversely, chambers with a smaller h/w ratio are more prone to damage when stress waves are incident from the floor. ### Conclusion The paper provides a fundamental understanding of the dynamic response of deep U-shaped chambers under transient loads from different incident angles, which is significant for guiding the design and support schemes of deep rock engineering.