Dynamic imbibition with aid of surfactant in tight oil fracture network model
Yongpeng Sun,Kai Gao,Zhihao Yu,Yanchao Fang,Yilin Chang,Ang Chen,Caili Dai,Chuanxi Wang,Chao Chen,Yingbiao Xu
DOI: https://doi.org/10.1016/j.petrol.2020.107393
IF: 5.168
2020-10-01
Journal of Petroleum Science and Engineering
Abstract:<p>Hydraulic fracturing is required during development of tight oil reservoir. Flowback fluid, usually surfactant, is generally used in fracturing fluid to accelerate the fluid flow back. For the reservoir with matrix and fracture construction, this flow of surfactant is dynamic imbibition. Betaine surfactant has good salt and temperature tolerance. In this study, a betaine surfactant was characterized from interfacial tension and wettability. In order to simulate complex fracture conditions, a matrix-fracture network model was established. It was featuring adjustable fracture width from 476.5 to 72.8 μm through changing the confining pressure. Then series of experiments were carried out on the dynamic imbibition in tight oil fracture network model with the aid of surfactant. Various factors that impact on the oil recovery during dynamic imbibition of models were examined. The oil recovery by dynamic imbibition was gradually increased with the increasing concentration of surfactant, matrix permeability, and temperature. The oil recovery reached to 22.6% with surfactant concentration of 0.5 wt%. With various surfactant flow rate, the oil production reached to 18.1% at a flow rate of 0.1 mL/min during dynamic imbibition. The oil distribution in the matrix and fracture was analyzed using Magnetic Resonance Imaging (MRI) method. It showed that the surfactant can effectively improve the oil recovery in the matrix near fracture during dynamic imbibition. The study would provide further understanding for the dynamic imbibition with aid of surfactant in tight oil sandstone reservoir after fracturing.</p>
energy & fuels,engineering, petroleum