Abstract:To study the dynamic mechanical characteristics and constitutive relation of concrete materials under freeze–thaw (FT) cycle conditions, C35 concrete was taken as the research object in this paper, and FT tests were carried out with a freeze–thaw range of −20–20 °C and a freeze–thaw frequency up to 50 times. By using the separated Hopkinson pressure bar (SHPB) system, impact compression tests of concrete specimens under different FT cycle actions were developed, then the dynamic fracture morphology, fracture block distribution, stress–strain curve, peak stress and other dynamic mechanical properties of concrete were analyzed, and the influence law of FT action and strain rate was obtained. Through introducing the freeze–thaw deterioration damage factor and the stress damage variable, the dynamic visco-elastic damage constitutive equation of freeze–thawed concrete was constructed based on component combination theory. Furthermore, the damage evolution process and mechanism of freeze–thawed concrete materials were revealed. The research results show that the dynamic mechanical properties of concrete under a freeze–thaw environment are the combined results of the freeze–thaw deterioration effect and the strain rate strengthening effect. The dynamic visco-elastic damage constitutive model established in this paper can effectively describe the dynamic mechanical properties of freeze–thawed concrete, and has the characteristics of few parameters and good effect. The stress damage evolution path of concrete goes backward with the increase of FT cycles and the development speed gradually slows down. The greater the difference in FT cycles, the greater the difference in stress damage path.

STRESS-STRAIN RELATIONSHIP OF STIRRUP-CONFINED CONCRETE SUBJECTED TO FREEZE-THAW CYCLES

Effect of freeze–thaw cycles on the stress–strain curves of unconfined and confined concrete

STRESS-STRAIN RELATIONSHIP OF CONCRETE AFTER FREEZING-THAWING CYCLES

Experimental Study on Complete Compressive Stress-Strain Curve of Concrete Subjected to Freeze-Thaw Cycles

Flexural behaviour of reinforced concrete members subjected to freeze-thaw cycles

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Bond Behavior of Steel Bars in Concrete Confined with Stirrups under Freeze-Thaw Cycles

Flexural Behaviour of Reinforced Concrete Beams under Freeze–thaw Cycles and Sustained Load

Deterioration characteristics of the bond between reinforcement and concrete subjected to freezing-thawing cycles and steel corrosion

Experimental study on mechanical behaviors of prestressed concrete beams subjected to freeze-thaw cycles

Experimental Study on Properties of Fully-Graded Concrete under Uniaxial Dynamic Compressive Stress State after Freezing-Thawing Cycles

Experimental Study of Dynamic Biaxial Compressive Properties of Full Grade Aggregate Concrete after Freeze Thaw Cycles

STUDY OF THE SHEAR BEHAVIORS OF RC BEAMS AFTER FREEZE-THAW CYCLES

Uniaxial Dynamic Tensile Properties of Hydraulic Concrete after Freezing-Thawing Cycles

RESEARCH ON BENDING PERFORMANCE OF CONCRETE BEAMS AFTER FREEZE-THAW CYCLES

Bond Behavior of Reinforced Concrete Considering Freeze–Thaw Cycles and Corrosion of Stirrups

Dynamic Mechanical Properties and Visco-Elastic Damage Constitutive Model of Freeze–Thawed Concrete

Mesoscale Simulation of Fatigue Behavior of Concrete Materials Damaged by Freeze-Thaw Cycles

Mathematical Modeling and Analysis of Concrete Subjected to Freeze-Thaw Cycles

Failure of the SRC under freeze- thaw cycles by the push-out tests