Abstract:Thin-walled shell with inner ribs is the main load bearing structure for aerospace products, which decides the products overall performance. Flow spinning process is an effective method to realize the integrated manufacturing of thin-walled shells with inner ribs. However, this process still has defects of insufficient filling at the rib groove and fracture at the rib root. A novel process is proposed to fabricate the thin-walled shell with inner ribs by introducing ultrasonic energy into flow spinning process based on the softening effect and frictionreducing effect of the ultrasonic energy. This paper focuses on the forming quality of the inner longitudinal ribs. The longitudinal ribs are designed along the axial direction of the cylindrical parts. The rheological characteristics of material forming with ultrasonic is studied and the local cumulative deformation law of the inner rib material at the rib groove is revealed. The ultrasonic-assisted flow spinning platform was established and ultrasonic energy was introduced in the radial direction of the initial cylindrical parts. The experiment results with different ultrasonic amplitudes showed that the rib tip's surface morphology and rib height were improved with ultrasonic. The finite element models were established to analyze the deformation characteristics of the inner ribs. The constitutive equation was established to reflect the material flowing property with ultrasonic. The simulation results showed that the material flowed into the groove more at the screw-in end and flowed out more at the screw-out end with ultrasonic. This flow state reduced the material accumulation phenomenon at the screw-out end. The tip's surface morphology of inner longitudinal ribs were more uniform with ultrasonic. The displacement vectors of the nodes at rib groove were also extracted to explore the flow difference. Additionally, the rib height increased with ultrasonic. In conclusion, it is productive to apply ultrasonic into the ribbed cylindrical parts flow spinning process to enhance the forming quality of the inner longitudinal ribs.

Effects of Material Properties on Power Spinning Process of Parts with Transverse Inner Rib

Effects of Forming Parameters on Deformation Uniformity of Thin-walled Parts during Multi-pass Spinning

Process factors influencing spinning deformation of thin-walled tubular part with longitudinal inner ribs

A Systematic Study on the Effects of Process Parameters on Spinning of Thin-Walled Curved Surface Parts With 2195 Al-Li Alloy Tailor Welded Blanks Produced by FSW

Research on the Influence of Main Spinning Process Parameters on the Forming Quality of 20 Steel by Strong Spinning

Research on the Influence of Ultrasonic on the Inner Rib’s Surface Morphology of Ribbed Cylindrical Parts in Flow Spinning Process

Plasticity Improvement of Ball-Spun Magnesium Alloy Tube Based on Stress Triaxiality

Multi-pass Spinning of Thin-Walled Tubular Part with Longitudinal Inner Ribs

Study on Power Spinning Feasibility of High Strength & Toughness Ti-451 Alloy

Effect of Ultrasonic Attenuation Characteristics on Forming Accuracy of Ribbed Cylindrical Parts in Ultrasonic-Assisted Spinning Process

Study on the Ultrasonic-Assisted Spinning of Thin-Walled Cylindrical Parts with Longitudinal and Transverse Ribs

Study on the spinning process of thin-walled aluminum alloy vessel head

Influence of Inner Roller Geometric Parameters on Counter-Roller Spinning with 6061 Aluminum Alloy Tube

Study of Dieless Radial Spinning for Thick-Walled Cylindrical Parts With External Grooves

Effect of Multi-Pass Power Spinning on Microstructure Homogenization and Mechanical-Property Strengthening of Ti2AlNb-Based Alloy Using Welded Tube Blank

Research of Net-Shape Power Spinning Technology for Poly-V Grooved Aluminum Pulley

Strain-dependent Heterogeneity of Microstructure and Mechanical Properties of 2195 Al-Li Alloy During Power Spinning and Heat Treatment

Research on power spinning process of 2A12 aluminum alloy thin-walled parts

Simulation Study of Aluminum Alloy Ribbed Member Spinning with Ultrasonic Vibration

Study of Deformation Mechanism of Backward Ball Spinning of Thin-Walled Tube with Longitudinal Inner Ribs

NUMERICAL SIMULATION AND EXPERIMENTATION CUP-SHAPED THIN-WALLED INNER RECTANGULAR GEAR FORMED BY SPINNING