Abstract:On water impact, a projectile experiences impact forces that can threaten its structural safety and the stability of its trajectory. In the engineering applications , the underwater vehicle may need to entry and exit of water several times. The elastic buffer can be used repeatedly, which meet the requirement of the scene. To mitigate the effects of a strong impact, a projectile with a spring buffer connecting its main body and disk is designed in this work. The impact force of the main body during water entry is studied experimentally. The experimental equipment and the force measurement system are newly developed by the authors. The main focus is the cavity evolution and the axial force of the main body. The cavity of the projectile with a buffer is slightly elongated and thickened compared with that without a buffer. A special necking phenomenon of the cavity is observed as the spring buffer is compacted. The effects of the spring stiffness , the disk mass, and the impact velocity on the axial force and impulse are extensively discussed. Compared with the case without a buffer, the axial force of the main body is only mitigated within a small range of stiffness values. When the stiffness increases, the axial force begins to fluctuate with a larger peak and a narrow pulse. The peak force is nearly twice that in the case without a buffer. However, the impulse is always smaller, although some fluctuations occur in the larger stiffness cases. Additionally, an increased disk mass can also mitigate the force peak and the impulse of the main body, but fluctuations also occur in cases with larger masses. The coefficients of the axial force and the impulse of the main body decrease with increasing impact velocities. The result indicates that the elastic buffer only in a narrow stiffness can effectively reduce the impact load of the water entry projectile. This study can provide references for the load reduction design of the projectile with an elastic buffer during water entry or exit.

Buffering the Backward Impact of Piston of Liquid-Jet Hammer

Numerical Simulation of the Performance of the Sc-89 Jet Impact System

The Simulation Study of a New-Type Frictionless Pneumatic Cylinder

Research on Multi-Objective Optimization of Low Pulsation Unloading Damping Groove of Axial Piston Pump

Effect of Surface Texture on Wear Reduction of the Tilting Cylinder and the Valve Plate for a High-Speed Electro-Hydrostatic Actuator Pump

Investigation into the Effects of the Variable Displacement Mechanism on Swash Plate Oscillation in High-Speed Piston Pumps

Experimental and Numerical Studies on Erosion Damage in Damping Holes on the Valve Plate of an Axial Piston Pump

Structural Design and Controllability of Magnetorheological Grease Buffers under Impact Loading

Cushion Process of the Hydraulic Cylinder of Hydraulic Operating Mechanism for High Voltage Circuit Breaker

Velocity Control of the Horizontal Buffer System for Heavy Load Forging Manipulator

Experimental investigation on the impact force of the oblique water entry of a slender projectile with spring buffer

Attenuating Characteristics of a Multi-Element Buffer Bottle in an Aircraft Piston Pump

Effect of control flow on main jet switching for single and double feedback channels fluidic oscillator

Optimization of the Outlet Unloading Structure to Prevent Gaseous Cavitation in a High-Pressure Axial Piston Pump

Study on Buffering Process of High Speed Hydraulic Cylinder Based on CFD

Dynamic crushing of a dedicated buffer during the high-speed vertical water entry process

Design and Dynamic Characteristics of a Double-Layer Permanent-Magnet Buffer under Intensive Impact Load

Analysis of the Cylinder Block Tilting Inertia Moment and Its Effect on the Performance of High-Speed Electro-Hydrostatic Actuator Pumps of Aircraft

The Effect of Slotted Hole on Minimum Oil Film Thickness of Piston in Radial Piston Hydraulic Motor

3D FSI FEA SIMULATION AND ANALYSES OF THE DYNAMIC CHARACTERISTICS OF A DISPLACEMENT-SENSITIVE LIQUID DAMPER

Crushing behavior and load-reducing performance of a composite structural buffer during water entry at high vertical velocity