Abstract:A robust multi-objective wing design optimization procedure using CFD is presented in this work. Instead of directly applying CFD to wing design optimization, a Kriging aerodynamic model that approximates CFD result is proposed to save computational cost. By introducing 6 sigma robust approach as a sub-objective function, multi-objective wing design problems can be solved with aerodynamic robustness. Non-Uniform Rational B-Spline curves (NURBS) are introduced to depict the wing geometry in design optimization process. The most important parameters of the wing geometry can then be screened by design of experiment and treated as design variables due to the local variation property of NURBS. Under this formulation, a multi-objective genetic algorithm based on non-dominated sorting is employed to handle multiple flight conditions in wing design. The optimum wing geometry is selected according to trade-off among design objects on the non-dominated front. To validate the proposed approach, two robust design optimization cases are studied for ONERA-M6-Wing. It turns out that the drag coefficient is insensitive to Mach number between Ma0.8-Ma0.9 after robust optimization. The result also verifies the effectiveness of our method in boosting performance and robustness of multiple flight conditions: the lift curve slope (Ma0.3) of optimum wing and the 6 sigma objective function of transonic drag (Ma0.8-Ma0.9) increase by 11.9% and 25.4%, respectively. Observations in the optimization cases are concluded as follows: 1) For wing aerodynamic design problems, the multi-objective robust optimization can both improve the performance at different flight conditions and provide robustness. 2) The Kriging aerodynamic model derived from CFD result can satisfy the precision requirement of wing design. 3) Even though the optimization result is subject to the weights of the 6 sigma function in sub-object, the influence is not comparable to the trade-off among design objects. 4) The optimum solution obtained by proposed approach is superior to gradient based optimization method, while the computational cost is acceptable.

Multi-object Aerodynamic Configuration Parameter Design Using Kriging Approximation

Sensitivity-Based Parameterization for Aerodynamic Shape Global Optimization

Particle Swarm Optimization of Aerodynamic Shapes with Nonuniform Shape Parameter–Based Radial Basis Function

Multiobjective Shape Optimization of A Hypersonic Lifting Body Using A Correlation-Based Transition Model

Aerodynamic Optimization Design for Airfoil Based on Kriging Model

Multi-objective Aerodynamic Design Optimization for Airfoil Using Kriging Model

Multi-point Aerodynamic Optimization Design Strategy of Rotor Airfoil With Multi-constrain Conditions

Aerodynamic Optimization Method Based on Bezier Curve and Radial Basis Function

Application of Improved Kriging-Model-Based Optimization Method in Airfoil Aerodynamic Design

An Adaptive Dual-Kriging Method Based on Parameter Sensitivity Analysis and Application to Vibration Reduction Optimization of Helicopter Rotor Test-Bed

Multi-objective and Multi-constrained Optimization Design for a Helicopter Rotor Airfoil

A Study of Multi-Objective Aerodynamic Optimization Design for Variable Camber Airfoils and High Lift Devices

Research on Multi-Fidelity Aerodynamic Optimization Methods

Robust Multi-Objective Wing Design Optimization Via Cfd Approximation Model

Application of CFD in Three-dimensional Aerodynamic Optimization at Conceptual and Preliminary Design Stage

An Optimal Control Method for Aerodynamic Design of Airfoil with Multi-Constraint Conditions

Multi-Objective Optimization Design of Liftbody Aircraft Using Kriging Model

Two-stage aerodynamic optimization method based on early termination of CFD convergence and variable-fidelity model

Parameterization and Optimization of Hypersonic-Gliding Vehicle Configurations During Conceptual Design

Application of Kriging Surrogate Model for Aerodynamic Shape Optimization of Wing

Aerodynamic optimization system based on CST technique