Abstract:This paper proposes a new type of fabricated shear wall system, that is, the two ends of the horizontally distributed ribs and the top of the vertical distributed ribs are reliably connected with the cast-in-situ belt, and the bottom of the vertical distributed ribs is not penetrated and only connected by mortar. To study the seismic performance of the new wall, 7 specimens of the shear wall were designed and manufactured, including 2 cast-in-place shear walls and 5 new fabricated shear walls. Through low-cycle reciprocating loading tests, different analyses were made. Shear span ratio and different edge restraint structure of the new fabricated shear wall failure mode, bearing capacity and other seismic performance, and through OpenSees finite element analysis of the wall to verify the correctness of the modelling method. The test results show that the failure characteristics of the new wall are mainly the cracking and penetration of the mortar layer, the crushing of the corner concrete and the local buckling of the steel bars at the bottom of the edge members; compared with the cast-in-place wall, the new wall has the lower bearing capacity, but the deformation and energy consumption are not much different. The reinforced edge members can effectively compensate for the weakening of the integrity of the wall panel caused by the discontinuity of vertical steel bars. Among the 7 specimens, the overall performance of the wall with increased longitudinal reinforcement ratio is the best. The error between the wall finite element results and the test results is less than 5%, which shows that the modelling method in this paper has sufficient accuracy for the evaluation of the seismic performance of the new wall. In general, the new prefabricated shear wall system is feasible in high-rise buildings.

Experimental Study on Seismic Performance of Coupled Shear Walls with Upper Part Using Recycled Concrete

Seismic Behavior of Composite Shear Walls Incorporating Concrete-Filled Steel and FRP Tubes As Boundary Elements

Experimental Study of Seismic Performance of Coupled Shear Wall Structure with Replaceable Coupling Beams

Seismic Performance of Reinforced Concrete Squat Walls with Embedded Cold-Formed and Thin Walled Steel Truss

Experimental Research on Seismic Behavior of Low Shear-Span Ratio Composite Shear Wall with Double Steel Plates and Infill Concrete

Experimental Study on Seismic Behavior of Reinforced Concrete Composite Shear Wall with Level Splice

Numerical Study of Reinforced Concrete Coupled Shear Walls Based on a Two-Dimensional Finite Element Model

Experimental Study on Seismic Performance of Composite Shear Wall with Horizontal Connection and Frame

Seismic Performance of Flexure-Dominated Reinforced-Engineered Cementitious Composites Coupled Shear Wall

Experimental and numerical study on seismic behavior of shear wall with cast‐in situ concrete infilled walls

Seismic performance of innovative prefabricated reinforced recycled concrete shear walls

Experimental study of precast concrete coupled walls

EXPERIMENTAL STUDY ON SHEAR BEHAVIORS OF COLD-FORMED THIN-WALLED STEEL REINFORCED CONCRETE SHEAR WALLS WITH DIFFERENT DETAILS

Numerical Study on Optimized Application of Engineered Cementitious Composites in RC Coupled Shear Wall Structures

Study on seismic performance of precast fabricated RC shear wall with opening filling

Experimental Study on the Seismic Behavior of Innovated CTSRC Composite Shear Walls for Multi-Story Residences

Seismic Performance of Composite Low-rise Shear Wall with Concrete-filled Round Steel Tube Columns and Concealed Steel Trusses

Seismic Performance of Composite Shear Walls Constructed Using Recycled Aggregate Concrete and Different Expandable Polystyrene Configurations

Experimental study and finite element analysis of seismic behavior of sprayed concrete sandwich shear walls

Study on seismic performance of reinforced concrete shear wall with diagonally distributed reinforcement

Experimental study on seismic performance of new-type fabricated shear wall with mortar connection