Abstract:In this study, the finite element and smoothed-particle hydrodynamics adaptive method was used to reproduce experiments on honeycomb sandwich shields impacted by spherical projectiles at hypervelocities, which can provide phenomena that are difficult to observe experimentally. The simulation results clearly reproduced the formation, development, and stabilization processes of the debris cloud as well as the damage and response processes of the honeycomb sandwich shield. The petal-shaped multicellular internal structure of the debris cloud was proposed by combining the formation and development of the debris cloud with its experimentally observed morphology. The damage and response processes of the honeycomb sandwich shield can be divided into two stages, namely, the crushing and inertial motion stages, to elaborate the varying failure modes of the honeycomb sandwich shield in different stages. The crushing stage represents the response of the material, whose failure modes include penetration, bending, buckling, tensile fracture, and compression failure. The inertial motion stage represents the structural response (bending and buckling of foils), which, at different positions, leads to folding and compaction of the honeycomb core layer by layer along the radial direction. The factors influencing the channeling effect were investigated, and the influences of the projectile diameter and impact position on the channeling effect and protection performance of the honeycomb sandwich shield were analyzed. The envelope analysis method for damage areas, which can predict the damage to the honeycomb core and rear plate at any impact position using an envelope diagram, was proposed. It was shown that the foil at different positions works by blocking or partitioning, which seriously affects the channeling effect. This study provides new ideas for optimizing the design of Whipple shields.

Numerical Simulation in Effect of Geometrical Parameters of Al-foam on Performance of Stuffed Shields

Numerical Simulation Investigation in Hypervelocity Impact on Al-foam Stuffed Shields

Numerical Simulation Investigation in Hypervelocity Impact on Shield Structure Containing Aluminum Foam

Experimental comparison of Al sphere hypervelocity impact on Al-foam sandwiched shield and Al-foam stuffed shield

Performance of different metal-foam stuffed whipple shield against hypervelocity impact of space debris

Experimental research on performance of al-foam stuffed whipple shield against hypervelocity impact

Distribution of debris cloud caused by hypervelocity impact on AL-foam shield

Numerical Simulation Investigation in Ballistic Limit of Whipple Shield Structure with Al-foam Bumperb

Numerical Simulation Investigation in Behavior of Al-Foams Structure under Hypervelocity Impact

Numerical Investigation on Dynamical Response of Aluminum Foam Subject to Hypervelocity Impact with Material Point Method

Numerical Study of Dynamic Behavior of Foams Subjected to High- to Hyper-Velocity Impact

Comparison of shielding performance between Al-foam and solid-aluminum bumpers with numerical simulation

Investigation into damage of Al-foam stuffed whipple shield under hypervelocity projectiles impact

Behavior of Aluminum Foams under Hypervelocity Impact: Validation of Numerical Simulation

Evaluating Load-Bearing and Hypervelocity Impact Shielding Capabilities of Face-Centered Cubic Lattice Core Sandwich Panels

Numerical Simulation of Non-Spherical Projectiles Hypervelocity Impact on Spacecraft Shield Configuration

Experimental research on performance of hybrid whipple shield with Al-mesh and basalt fiber woven

Numerical Simulation Validation and Research on Shield CHaracteristics of Basalt Fiber Woven and Al-Mesh Bumper

Numerical study on debris cloud and channeling effect of honeycomb sandwich shields under hypervelocity impact

Numerical Simulation of Blast-resistant Performance of Aluminum Foam Sandwich Structures and Optimization

Improved shielding structure with double honeycomb cores for hyper-velocity impact