Abstract:The 50 m box girders in the tidal flat section of unnavigable channel bridge in Hangzhou Bay Bridge adopt the approach of trolley on the under bridge to transport and erect the girder. Based on the actual working and load conditions, a precise 3D solid FEM simulation model is established by taking account of the space effects of prestressing force, applying equivalent node force and taking reasonable consideration of support details, etc. The values for concrete characteristics are determined according to current specifications for the design of highway bridge. The load is calculated with the consideration of the worst factors. The bottom of the support is simulated as rigid element. Modulus of elasticity for girder contact layer will not appear tensile stress when rotations and deformations occur at girder end. Element mesh should be as subdivided as possible when the structure is discretized. Owing to the relative complexity of the stress at girder end, thicker than span intermediate element mesh is adopted for girder end. The integral deformation and the space stress distribution of weight-bearing box girder are calculated. Results indicate that the deformation is relatively small and the maximum deflection is within the reversed arch because the load is quite close to the support. The maximum main tensile stress of the support section occurs at the side of bottom plank surface, which exceeds concrete cracking strength. Consequently, concrete in this area should be treated and stiffened so as to avoid it from cracking. When the maximum main compressive stress occurs near the stabilizer of girder-erecting machine, its value is less than the compressive strength of concrete.

Innovative Form and Static Analysis of Cable-Girder Anchorage in Cable-Stayed Bridges

Static Instability Analysis Of Long-Span Cable-Stayed Bridges With Carbon Fiber Composite Cable Under Wind Load

Structural design and analysis of a large span partially single-sided cable-stayed pedestrian bridge

Main-girder String Structure with Continuous Cables for Cable-Stayed Bridges

Safety Factor for Steel and Carbon Fiber Reinforced Plastic Cables of Long-Span Cable-Stayed Bridges

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Applicability of Effective Tangent Modulus Method in Evaluation of Buckling Strength of Long-Span Cable-Stayed Bridges

Dynamic characteristics and seismic response analysis of cable-stayed bridges taking into account cable lateral vibration

Cable force adjustment and post-adjusting nonlinear analysis of a cable-stayed bridge based on ANSYS

Spatial Analysis of Self-anchored Suspension Bridge and Its Experimental Study

Analysis of Parametric Influence on Anchorage of Cable-stayed Bridge

The Full-scale Model Test and Spatial Analysis for the Segment of Cable Pylon of Cable-stayed Bridge

Study on behaviors of cable anchorage zone of self-anchored suspension bridges with steel box girders

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Experimental study on stability of orthotropic steel box girder of self-anchored suspension cable-stayed bridge

Nonlinear Static Analysis of Long-Span Cable-Stayed Bridges under Dead Loads

Analysis of Stiffening Girder Erection Scheme of Single Tower and Single Span Asymmetric Suspension Bridge

Structural Performance and Strength Prediction of Steel-To-Concrete Box Girder Deck Transition Zone of Hybrid Steel-Concrete Cable-Stayed Bridges

Research on Cable Anchorage Systems for Self-Anchored Suspension Bridges with Steel Box Girders

Aerostatic stability of long-span cable-stayed bridges: Parametric study

Iterative Analysis on Main Cable Shape of Suspension Bridges