Abstract:A linearly polarized white light emitting from blue chip capitalized on a composite metal-dielectric-metal nanowire grating is proposed. The finite-difference time-domain method is used to simulate the whole structure for pursuing high transmittance and high extinction ratio. Based on the laboratory process level with a period of 180 nm and a fill ratio of 0.5, the optimal parameters of the composite metal-dielectric-metal nanowire grating are determined as aluminum with a height of 75 nm, and PMMA with a height of 100 nm. After multi-parameter optimization analysis, the theoretical extinction ratio in the wavelength of 400–700 nm is 33–50 dB, and the transmittance of TM-polarized wave is 50–85% at incident angle range of ± 15°. A large area of composite metal-dielectric-metal nanowire grating is fabricated by nanoimprint lithography technology, and its performance is tested by spectrometer and highly quality polarizing analyzer under the condition of white light source and 632 nm laser. The results show that the extinction ratio and transmittance of TM-polarized wave can reach up to 38.3 dB and 75% when the light source is under normal incidence at the whole wavelength range. The presented findings provide an alternative path for low-cost, large-area fabrication of high-performance polarized white light, which can be applied to color display or other polarized optoelectronics devices.

Efficiency Improvement for A Polarizing Color Filter Based on Submicron Metal Grating

Design of reflective chromatic polarizers at 45° incidence

Polarizing Color Filter Based on Subwavlength Metallic Grating with Grooves Carved In

Highly Efficient Omnidirectional Structural Color Tuning Method Based on Dielectric-Metal-dielectric Structure.

High-color-purity Transmissive Colors with High Angular Tolerance Based on Metal/dielectric Stacks

Design and simulation of omnidirectional reflective color filters based on metal-dielectric-metal structure.

Design of incident angle-independent color filter based on subwavelength two-dimensional gratings

Compact Transreflective Color Filters and Polarizers by Bilayer Metallic Nanowire Gratings on Flexible Substrates

Design and Fabrication of Bi-Layer Metallic Nanowire Polarizers and Colorfilters Based on Surface Plasmon Waveguide Mode Resonances

A Method of Improving the Structural Color Quality of HfO2 Grating Based on Thin Film Filter

High-transmission Polarization-Dependent Active Plasmonic Color Filters

High Performance Polarizing Beam Splitter With Embedded Metal-Wire Nanograting

Three-layer Polarization-Selective Dielectric Transmission Grating with the Enhanced Angular Bandwidth

Composite color filters for wide color gamut and high optical efficiency liquid crystal displays

A linearly polarized white light based on a composite metal-dielectric-metal nanowire grating

Design and Fabrication of Highly Selective Polarizers Using Metallic–Dielectric Gratings

Design of an Ultrabroadband and High-efficiency Reflective Linear Polarization Convertor at Optical Frequency

Reflection characteristics of metal-dielectric-metal reflective-type color filter

69.2: Compact Colorfilter and Polarizer Based on Nanowire Grating for Energy Efficient Display

Polarization Tunable Color Filters Based on All-Dielectric Metasurfaces on a Flexible Substrate.

Ultrabroadband Two-Layer Dielectric/metal on a Silica Substrate Hybrid Grating Polarizer