Abstract:Inspired by the structure of a beetle forewing, angularly heterochromatic structural colors with an asymmetric Fabry–Perot cavity are constructed by homologous magnetron sputtering, with high color saturation and stable mechanical properties. The ultrahigh‐performance parameters are determined by the interference of the reflective layer with an amorphous structure and its oxide and the absorbing island layer with a controllable structure. The existing color filter implementation schemes are prone to introduce prestress during the preparation process due to the large difference in thermal expansion coefficients of different layers of materials, resulting in poor mechanical stability. Inspired by beetle forewings' structure, it is proposed to construct asymmetric Fabry–Perot (F‐P) angular heterochromatic structural colors utilizing homologous materials through a continuous deposition method of magnetron sputtering technology. The fabricated large‐area F‐P‐type reflective filters not only exhibit high color saturation but also achieve good bonding ability between the layers with a steady‐state friction coefficient of ≈0.1. The large‐area reflective filter can achieve different colors such as blue, yellow, violet, and green, which is in agreement with the simulation results. This work not only provides a new design method for advanced decorative applications but also provides protection to the substrate.

Reflection characteristics of metal-dielectric-metal reflective-type color filter

Design and simulation of omnidirectional reflective color filters based on metal-dielectric-metal structure.

Design of reflective chromatic polarizers at 45° incidence

Tunable, Omnidirectional Structural Color on Reflection Based on Metal-Siox-Metal Structure

Highly Efficient Omnidirectional Structural Color Tuning Method Based on Dielectric-Metal-dielectric Structure.

Design of incident angle-independent color filter based on subwavelength two-dimensional gratings

High-color-purity Transmissive Colors with High Angular Tolerance Based on Metal/dielectric Stacks

Compact Multilayer Film Structure for Angle Insensitive Color Filtering

Decorative near-infrared transmission filters featuring high-efficiency and angular-insensitivity employing 1D photonic crystals

Angle Insensitive Color Filters in Transmission Covering the Visible Region

Narrow band filters in both transmission and reflection with metal/dielectric thin films

Color-tuning method by filling porous alumina membrane using atomic layer deposition based on metal-dielectric-metal structure.

Design and Fabrication of a Novel Reflection Filter.

Analysis of the spatial filter of a dielectric multilayer film reflective cutoff filter-combination device

Manipulation of resonance orders and absorbing materials for structural colors in transmission with improved color purity

A Method of Improving the Structural Color Quality of HfO2 Grating Based on Thin Film Filter

Resonant-mode engineering for additive reflective structural colors with high brightness and high color purity

Bio‐Inspired Homologous Magnesium‐Based Reflective Filters with Angular Heterochromatic Structural Colors

Engineering the absorption spectra of thin film multilayer absorbers for enhanced color purity in CMY color filters

Dynamic Transmission-Reflection Dichroism Based on Humidity-Responsive Metal-Hydrogel-metal Nanocavities

Optical Filter Based on Metallic Glass MgZnCa Micro/Nano-structure Array