Abstract:The prime camera with a mosaic charge-coupled device (CCD) array is the imaging terminal of the wide field survey telescope (WFST), and the flatness of its focal plane array (FPA) is one of the critical indicators that determine the imaging quality of the telescope. The FPA works at C in a vacuum Dewar to suppress the dark current of CCDs. A large-size FPA of high flatness is hard to realize due to the influence of multiple factors, such as geometric tolerance, force, and temperature deformation. To address this issue, a CCD mosaicking technique based on an error accumulation model is proposed. First, the error source of FPA is analyzed with high-precision measurement and finite element simulation. Second, an assembly deviation simulation calculation model is established based on the actual contact surface morphology characteristics, and the error transfer process is analyzed by combining the small displacement torsor (SDT) and homogeneous transformation matrix (HTM). Then, the effects of force and temperature deformation on each CCD are superimposed independently by HTM, and the feasibility is verified by finite element simulation. Finally, the mosaic FPA of the prime focus camera (PFC) is completed based on this model. Comparing the simulated and measured results, the flatness of the FPA at room temperature reaches a PV of m. The confidence interval for the flatness of the FPA is determined as [13.48, 17.60] m, with a confidence level of 95%. Also, upon comparing the distribution of CCDs between measurement and simulated assembly, it is evident that only a subset of CCDs shows a height deviation of m, thus affirming the effectiveness of the simulated assembly process. The FPA suffers a significant bow-shaped deformation at low temperatures, and 99.18% of the measured points are within m.

Inspection Focus Technology of Space Tridimensional Mapping Camera Based on Astigmatic Method

A Method Of Autofocus For Remote Sensing Camera

Image tremble compensation for space camera

An absolute phase to world coordinates method for the defocusing structured light shape measurement system

Data Processing Method of Time-of-flight 3D Imaging Camera

Defocus Camera Calibration Based on Sinusoidal Phase Coding

Research on Auto-Centering Device in Surface Defects Evaluation System of Large Spherical Optics

High-speed 360° 3D shape measurement based on virtual stereo phase unwrapping method

High-speed 360 3D shape measurement based on visual stereo phase unwrapping method

Design of optical lens for space tridimensional mapping camera

Study of CCD Mosaicking Technique Based on Error Accumulation Model for WFST

Sub-pixel Location Algorithm for Planetary Center Measurement

Three-dimensional deformation measurement techniques in space multi-physical fields based on digital image correlation

Analysis and Calibration of Defocus Detection System Based on Astigmatism Method

Long-Periodic Analysis of Boresight Misalignment of Ziyuan3-01 Three-Line Camera

Study on automatic focusing technique for remote sensing camera

On-Orbit Self-Focusing Using Conjugated Optical Fiber Waveguides for Space Optical Cameras

Inner FoV Stitching of Spaceborne TDI CCD Images Based on Sensor Geometry and Projection Plane in Object Space

High-Accuracy Real-Time Attitude Determination and Imagery Positioning System for Satellite-Based Remote Sensing

Multi-beam array stitching method based on scanning Hartmann for imaging quality evaluation of large space telescopes

Design of a focusing system for micro-nano satellite remote sensing camera based on thermal control technology