Abstract:The starter generator, characterized by controllable starting torque and disturbance in generator load torque, poses challenges for the multi-electric aero engine control. The key to addressing this issue lies in multi-electric aero engine control with the collaboration of a starter generator. Firstly, a multi-electric aero engine model is established, comprising a full-state turbofan engine model to enhance low-speed simulation capability and an external characteristic model of a starter generator to improve real-time simulation capability. Subsequently, the control methods for a multi-electric aero engine with starter generator coordination are proposed in three processes, including the starting process, acceleration/deceleration process, and steady-state process. During the starting process, the acceleration is controlled by coordinating the torque of the starter generator and the fuel of the aero engine. During the acceleration/deceleration process, the fuel limit value is adjusted based on the electrical load of the starter generator. During the steady-state process, the fuel is compensated based on the q-axis current of the starting generator in response to load torque disturbance. Finally, hardware-in-the-loop simulation experiments are conducted for the control of a multi-electric aero engine. The results show that the coordination reduces the oscillation of the acceleration during the startup of a multi-electric aero engine, enhancing its ability to resist disturbances from electrical load fluctuations during power generation.

Aero Electric Propulsion System Control and Hardware-in-loop Simulation

FEA-Based Mathematical Modeling and Simulation for IPMSM Drive with Consideration of Saturation and Cross-Coupling Influence

Accurate Simulation and Analysis of PMSM Vector Control System

A Modified Deadbeat Predictive Current Control with Improved Dynamic Performance under Insufficient Voltage Margin for IPMSM

A Robust Deadbeat Predictive Current Control Method for IPMSM

A Modified Deadbeat Predictive Current Control for Improving Dynamic Performance of PMSM

Power Electronic Load System for Motor Drivers Testing Considering Motor Faulty Status Simulation

Adaptive Current Angle Compensation Control Based on the Difference in Inductance for the Interior PMSM of Vehicles

An Accurate HS-PMSM Rotor Loss and Performance Analysis Method Combine the Control System Simulation and Finite Element Simulation

Control System and Flux-weakening Algorithm of Electric Vehicle

A Novel Strategy of Control Performance Improvement for Six-Phase Permanent Magnet Synchronous Hub Motor Drives of EVs Under New European Driving Cycle

Multi-Electric Aero Engine Control and Hardware-in-the-Loop Verification with Starter Generator Coordination

System Efficiency Improvement for Electric Vehicles Adopting a Permanent Magnet Synchronous Motor Direct Drive System

Optimal Design and Control Simulation of a High-Accelerate Double-Sided Permanent-Magnet Linear Synchronous Motor

Modeling and simulation of all-electric propulsion system with three-closed loop control

An Online Energy-Saving Control Allocation Strategy Based on Self-Updating Loss Estimation for Multi-Motor Drive Systems

Drive Control Technology of Dual Three Phase Permanent Magnet Synchronous Motor for Electric Propulsion Aircraft

Low Power Consumption Control Method for BLDCM with Very Small Inductance and Nonideal Back EMF

Model Predictive Current Control Algorithm Based on Joint Modulation Strategy for Low-Inductance PMSM

Design of Double-LCC-Compensated Wireless PMSM System with Variable DC-Link Voltage Considering Efficiency Optimization and Dynamic Improvement

Hardware-in-the-loop Simulation of Electronic Differential Moment Power Steering Control Strategy for Multi-axle Vehicle