Abstract:Calculating wind resistance is an important process in the design of highway bridges. The current codes of many countries include different rules and formulas regarding the calculation of wind resistance. In this paper, the transverse-direction wind loads on long-span girder bridges with tall piers were calculated using six codes from different countries under various terrain, pier height, and girder length conditions. The pier-bottom shear force and moment results of transverse wind loads calculated using these six codes were compared with those obtained using the buffeting frequency domain method. Results showed that, in Class B terrain, wind load results predicated on China's 2004 general codes for the design of highway bridges and culverts, China's 2004 wind-resistant design specifications for highway bridges, Japan's 2007 wind-resistant design manual for highway bridges, and Part 2 of Britain's 2006 steel, concrete, and composite bridge specifications for loads resembled each other closely. Some difference was found to exist among Classes A, C, and D terrain. The 2007 AASHTO LRFD bridge design specifications and China's 2001 load codes for the design of building structures showed significant differences from the other four codes on all kinds of terrain. The applicability of the wind load rules in the AASHTO LRFD bridge design specifications to long-span girder bridges with tall piers merits further discussion. China's wind load calculations of load code for the design of building structures mainly depended on the empirical parameters of architectural structures with large dimensions, and had limited applicability to bridge structures. For long-span girder bridges with tall piers, such as bridges with span length-to-width or -depth ratios exceeding 30, or pier height-to-transverse-width ratio exceeding 10.7, the wind load calculated using these codes was generally underestimated due to the neglect of the effects of aeroelastic forces, which must be taken into account in the design of these kinds of bridges. DOI: 10.1061/(ASCE)BE.1943-5592.0000316. (C) 2012 American Society of Civil Engineers.

Analysis and research on windy condition investigation at the site of Xiamen-Zhangzhou cross-sea bridge

Bridge design basic wind speed based on the joint distribution of wind speed and direction

Methods of calculating wind loads on long-span girder bridges with tall piers and comparison of values

Analysis of Non-Stationary Wind Characteristics at an Arch Bridge Using Structural Health Monitoring Data

Development of joint probability distribution of wind speed and direction using long-term monitoring data

Analysis and Comparison on Wind Load of Long Span Girder Bridges with High Pier

Wind tunnel test and numerical simulation of wind characteristics at a bridge site in mountainous terrain

Numerical study of wind characteristics at a long-span bridge site in mountain valley

Measurement of wind field characteristicsat a long-span suspension bridge

Field-measurement-based local wind field characteristics on bridge deck of truss girder bridges in a deep-cutting gorge bridge site area

Wind Load Assessment with the JPDF of Wind Speed and Direction Based on SHM Data

Simplified Calculation of Equivalent Wind Loads of High Pier Continuous Rigid Frame Bridge in Double Cantilever State

Reliability Analysis of Foundation Structures of Offshore Long-span-bridges on Serviceability Limit States

Wind characteristics at bridge site in a deep-cutting gorge by wind tunnel test

Measurement of Non-Stationary Characteristics of a Landfall Typhoon at the Jiangyin Bridge Site

Wind field characteristics analysis at a long-span suspension bridge based on long-term monitoring data

Statistical analysis of wind characteristics of a railway arch bridge based on long-term monitoring data

Research on Mapping Relationship Between Environmental Load and Vibration Response of Bridge Structure Based on Structural Health Monitoring Data

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

Study on load design of Tianjin CiHai Bridge