Abstract:Calculating wind resistance is an important process in the design of highway bridges. The current codes of many countries include different rules and formulas regarding the calculation of wind resistance. In this paper, the transverse-direction wind loads on long-span girder bridges with tall piers were calculated using six codes from different countries under various terrain, pier height, and girder length conditions. The pier-bottom shear force and moment results of transverse wind loads calculated using these six codes were compared with those obtained using the buffeting frequency domain method. Results showed that, in Class B terrain, wind load results predicated on China's 2004 general codes for the design of highway bridges and culverts, China's 2004 wind-resistant design specifications for highway bridges, Japan's 2007 wind-resistant design manual for highway bridges, and Part 2 of Britain's 2006 steel, concrete, and composite bridge specifications for loads resembled each other closely. Some difference was found to exist among Classes A, C, and D terrain. The 2007 AASHTO LRFD bridge design specifications and China's 2001 load codes for the design of building structures showed significant differences from the other four codes on all kinds of terrain. The applicability of the wind load rules in the AASHTO LRFD bridge design specifications to long-span girder bridges with tall piers merits further discussion. China's wind load calculations of load code for the design of building structures mainly depended on the empirical parameters of architectural structures with large dimensions, and had limited applicability to bridge structures. For long-span girder bridges with tall piers, such as bridges with span length-to-width or -depth ratios exceeding 30, or pier height-to-transverse-width ratio exceeding 10.7, the wind load calculated using these codes was generally underestimated due to the neglect of the effects of aeroelastic forces, which must be taken into account in the design of these kinds of bridges. DOI: 10.1061/(ASCE)BE.1943-5592.0000316. (C) 2012 American Society of Civil Engineers.

Statistical analysis of wind characteristics of a railway arch bridge based on long-term monitoring data

Development of joint probability distribution of wind speed and direction using long-term monitoring data

SHM-based Probabilistic Representation of Wind Properties:Statistical Analysis and Bivariate Modeling

Statistical Evaluation of Wind Properties Based on Long-Term Monitoring Data

Stochastic Characterization of Wind Field Characteristics of an Arch Bridge Instrumented with Structural Health Monitoring System

An Identification Method For Short Hanger Tension Of Arch Bridges

Wind Load Assessment with the JPDF of Wind Speed and Direction Based on SHM Data

Bridge design basic wind speed based on the joint distribution of wind speed and direction

Probabilistic Method for Wind Speed Prediction and Statistics Distribution Inference Based on SHM Data-Driven

Analysis of Non-Stationary Wind Characteristics at an Arch Bridge Using Structural Health Monitoring Data

Statistical Analysis and Probabilistic Modeling of WIM Monitoring Data of an Instrumented Arch Bridge

Copula-based JPDF of Wind Speed, Wind Direction, Wind Angle, and Temperature with SHM Data

SHM-based Probabilistic Representation of Wind Properties: Bayesian Inference and Model Optimization

Methods of calculating wind loads on long-span girder bridges with tall piers and comparison of values

Probabilistic and deterministic wind speed forecasting based on non-parametric approaches and wind characteristics information

Explicit polynomial regression models of wind characteristics and structural effects on a long‐span bridge utilizing onsite monitoring data

Quantification of aerodynamic forces for truss bridge-girders based on wind tunnel test and kriging surrogate model

Machine learning for prediction of wind effects on behavior of a historic truss bridge

Probabilistic Assessment of the Equilibrium of a Steel Railway Bridge Based on Wind Tunnel and Traffic Records

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

A generalized Pareto distribution–based extreme value model of thermal gradients in a long-span bridge combining parameter updating