Abstract:A decentralized variable electric motor and fixed pump (VMFP) system with a four-chamber cylinder is proposed for mobile machinery, such that the energy efficiency can be improved by hydro-pneumatic energy storage, and problems of closed-circuit pump-controlled systems including asymmetrical flow and speed limitation are addressed. One of the chambers is arranged to the energy storage accumulator to increase energy efficiency, while the other chambers are flexibly connected to the pump ports to achieve variable transmission ratios. The piston areas of the multiple chambers are designed at first to permit a symmetric single-rod cylinder, and secondly a switching system with three operating modes is presented to expand force-velocity capabilities. Then, the four-chamber cylinder system with three solenoid valves is designed to substitute for the traditional two-chamber boom cylinder in a 6-ton excavator. A valve switching logic, as well as a feedforward and feedback compound speed controller, are presented. Simulations conducted in a 6-ton excavator model show that the maximum velocity increases by 66 %, together with asymmetrical flows to diminish the low-pressure charging accumulator. Peak power and energy consumption are both reduced by more than 20 % compared with the VMFP using the two-chamber cylinder. The energy-saving characteristics of the 6-ton excavator are emphatically analyzed considering energy storage and re-utilization. At last, experiment verifications are conducted in a lifting mechanism to verify the proposed energy-storage system.

Design of Pipe Robot Driven by Fluid for Collecting Energy Unit On-Line

Fluid drive and structural velocity-design of new type of pipe robot

An Underwater Robot with Self-Adaption Mechanism for Cleaning Steel Pipes with Variable Diameters

Fluid solid coupling based power generating system for a self powered pipeline robot

Method of On-line Obtain Energy for Medium Differential-pressure Drive In-pipe Robot

Principle Analyzing and Structure Designing for Driving and Timing of Fluid Medium Pressure Difference Pipeline Robot

Study on Speed Control System of In-Pipe Robot Power Self-Supported by Fluid

Design and Research on the Mechanical Adaptive In-Pipe Robot Drive Unit

Design of a New Energy-saving Hydraulic Pumping Unit with Variable Speed Control and Closed Oil Circuits

Energy conversion device for collecting fluid kinetic energy in pipe

Principle Analysis and Structure Design of the Pipeline Robot Driven by Fluid Medium Pressure Difference

Speed Control Characteristics and Energy Consumption Modeling for Composite Driving In-Pipe Robot.

Structure Design and Characteristic Analysis of Compound-Driven Unit for Pipeline Robot

Analysis of the Motion Mechanism of Actively Spirally Driven Pipe Robot

Design Method of Modular Units for Articulated in-Pipe Robot Inspecting System

Analytical Research On Energy Harvesting Systems For Fluidic Soft Actuators

The Design and Analysis of a Hydro-Pneumatic Energy Storage Closed-Circuit Pump Control System with a Four-Chamber Cylinder

Design and Development of Miniature long distance multi-moving robots for 3D Smart Sensing for underground Pipe Inspection

Mechanical Structure Design of a Power Self-support In- pipe Robot

Development of Control System of Economical and Multifunctional In-pipe Robot

An energy-saving hydraulic servo system with safety consideration for pipe fatigue tests.