Abstract:An efficient intersection signal scheme is of vital significance to urban traffic operation. At present, multiperiod fixed-timing control is still the traffic signal control method adopted by many urban intersections. For the optimization problem of signal scheme selection at signalized intersections, we proposed three two-step prediction optimization methods that match the traffic arrival in different periods with the corresponding optimal signal scheme, aimed at reducing the total delay of vehicles at signalized intersections. The first method predicts the traffic flow in each entrance direction of the intersection by minimizing the mean square error (MSE), then obtains the total vehicle delay of each scheme in the signal scheme set through the Highway Capacity Manual 2010 delay formula, and finally substitutes it into the signal optimization model to obtain the optimal scheme combination. The second method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing the MSE and then substitutes it into the signal optimization model to obtain the optimal scheme combination. The third method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing both the MSE and the prediction error between every two schemes and then substitutes it into the signal optimization model to obtain the optimal scheme combination. Verification based on actual intersection shows that better optimization results can be obtained by integrating optimization objectives into the prediction process. Besides, some practical insights can be drawn through applicability analysis and sensitivity analysis. First, the proposed model is more suitable for intersections where traffic arrivals vary greatly. Second, with the increase of scheme differences within a certain range, the advantages of the proposed method become more obvious. Finally, it is necessary to balance the flexibility of traffic control with control effectiveness in practical applications.

Delay Model for Signal Controlled Intersections

Traffic Signal Control Optimization Strategy Based on Simulation

Minimum Cycle Length of Two-Phase Road Intersection

Maximum cycle length optimization method of signalized intersection

A Semi-"Smart Predict, then Optimize" Method for Traffic Signal Control.

Research on the Optimal Method of Cycle Length for Signalized Intersection

Study on Pedestrian Signal Cycle Optimization

Optimization Method of Signal Timing Parameters Considering Comprehensive Efficiency of All Approach Lanes

Coordinated Control Model of Main-Signal and Pre-Signal for Intersections with Dynamic Waiting Lanes

A Group-Based Signal Timing Optimization Model Considering Safety for Signalized Intersections with Mixed Traffic Flows

A Cooperative Optimization Model for Variable Approach Lanes at Signaled Intersections Based on Real-Time Flow

Optimization of Stretching-Segment Design and Signal Timing in Traffic Control

Maximum Delay Model in Short Length Signalized Intersection under Supersaturated Traffic Flow

General Multi-Phase Intelligent Control Method for Traffic Flow at Single Intersection

Offset Optimization Based on Queue Length Constraint for Saturated Arterial Intersections

Bicycle Crossing Design and Signal Control Optimization for the Symmetric Intersection

Optimizing traffic signal control for continuous‐flow intersections: Benchmarking against a state‐of‐practice model

Optimization of Control Parameters for Adaptive Traffic-Actuated Signal Control

Adaptive Control of Isolated Intersections Based on Sequential Signal-Stage Optimisation

Pedestrian Delay Estimation at Signalized Intersections in Developing Cities

Optimization of Signal Timing for the Contraflow Left-Turn Lane at Signalized Intersections Based on Delay Analysis