Abstract:Milling force, closely related to machining efficiency and machining quality, is the most important technical parameter in computer numerical control machining. Aiming at five-axis flat-end milling, this paper proposes a milling force prediction model with arbitrary feed direction and cutter workpiece engagement (CWE). CWE, defining the interaction region between cutter and workpiece, is the basis for studying statics and dynamics of cutting. The efficiency of traditional solid modeling method is low and not suitable for large complex sculptured surface. Z-map method is also difficult to apply in five-axis flat-end milling. In response to this issue, analytic CWE model for five-axis flat-end milling of inclined plane is established by calculating the intersection of spatial surfaces; then, an algorithm is proposed to investigate the in-cut cutting edge. Different from the conventional slot cutting and half slot cutting processing, non-slot cutting processing with changing arbitrarily of cutter axis direction is used to calibrate the coefficients which are more suitable for five-axis machining. Combined with the instantaneous chip thickness considering cutter run-out, the cutting force coefficients which have quartic polynomial relationship with instantaneous chip thickness and the cutter run-out parameter identification model are established. The validity of this analytic model has been proved by experimental tests. The results also show that the measured milling force and predicted milling force are in good agreement in the aspect of the amplitude and trend in the different cutting depth, path interval, feed per tooth, and slope inclination angle, which verifies the efficiency of the coefficient identification model.

Study on Prediction the Cutting Force of the Face Milling

Experimental analysis and modeling of cutting power model

Predicting Milling Force Variation in Time and Space Domain for Multi-Toothed Face Milling

An Instantaneous Cutting Force Model for Disc Mill Cutter Based on the Machining Blisk-Tunnel of Aero-Engine

Milling Force Modeling for Disc Milling Cutter of Indexable Three-Sided Inserts Considering Tool Runout

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

Milling Force Model Prediction Considering Tool Runout with Three-Teeth Alternating Disc Cutter

A New Method for Prediction of Cutting Force Considering the Influence of Machine Tool System and Tool Wear

Analytical model for the prediction of milling forces: a review

Study of the Classification of Cutting Forces and the Build of Accurate Milling Force Model in End Milling

Predictive Model of Milling Force for Complex Profile Milling

Force prediction in ultrasonic vibration-assisted milling

A new cutting force prediction method in ball-end milling based on material properties for difficult-to-machine materials

A prediction method of cutting force coefficients with helix angle of flat-end cutter and its application in a virtual three-axis milling simulation system

Force Prediction Model of High Efficiency U Pass Milling

Prediction of Cutting Force in Five-Axis Flat-End Milling

A New Method for Cutting Force Prediction in Peripheral Milling of Complex Curved Surface

An Improved Cutting Force Prediction Model in the Milling Process with a Multi-Blade Face Milling Cutter Based on FEM and NURBS

Prediction of Cutting Force in Trochoidal Milling Based on Radial Depth of Cut

Stochastic Cutting Force Modeling and Prediction in Machining

A New Modeling Method For Cutting Forces In Side Milling Of Aluminum Alloy