Abstract:The communication quality between an RFID tag and a reader in a RFID network, especially the parameters of the passive tag antenna such as reading range, directivity and return loss, is affected by several factors from the environment. For practical RFID application, since the environment is complex and volatile, these factors include metallic surface of products, absorptions and impacts from neighbor tag antennas like scattering and mutual coupling. In this paper, it consists of the analysis of impacts caused by these factors and the design of passive tag antennas with resonant frequency 915 MHz able to be used in practical RFID applications against those impacts. Comparing with former ones, the proposed antenna reduces the size of the tag antenna to approximately commercial standard (18 mm x 48 mm x 3 mm) by using certain structures applied in the unit cell of metamaterial or HIS, while the properties including directivity, return loss and input impedance are still appropriate for RFID applications. Simulation results from HFSS indicates that at 915 MHz, the return loss can be about 21 dB, as most of the power can be radiated into the space towards the receiver. Meanwhile, the input impedance Z(0) = 9.4738 + j143.9189 Omega, perfectly matching the impedance of the RFID chip placed on the top surface of the antenna. The above improved parameters play an important role in prolonging the reading range.

RFID tag antenna design and its EM simulation based measurement method

A novel printed folded dipole antenna used for modern RFID system

Electromagnetic Environment of Uhf-Rfid

Analysis of Dipole-Like Ultra High Frequency Rfid Tags Close to Metallic Surfaces

UHF-RFID Tag Chip Integrated Reader Antenna Array

Design of Compact Passive Tag Antenna for Practical Rfid Applications

A Miniaturized 2.45ghz RFID Tag Antenna Using Planar

A single port dipole for UHF RFID tag antennas with eliminated read-orientation sensitivity

Capacitively loaded, inductively coupled fed loop antenna with an omnidirectional radiation pattern for UHF RFID tags

The Design and Simulation of UHF RFID Microstrip Antenna

A MINIATURIZED PRINTED DIPOLE ANTENNA WITH V-SHAPED GROUND FOR 2.45 GHZ RFID READERS

Dual-Dipole Uhf Rfid Tag Antenna with Quasi-Isotropic Patterns Based on Four-Axis Reflection Symmetry

RFID Antenna Near the Surface of Metal

Design and Radiation Mechanism Analysis of a Multi‐usage Ultra‐high Frequency Radio Frequency Identification Tag Antenna

A Compact 915 MHz PCB Antenna for RFID Tag

Design and Rfid Signal Analysis of A Meander Line Uhf Rfid Tag Antenna

Compact Single-Feed Dual-Mode Antenna for Active RFID Tag Application

Design of UHF RFID Tag with On-Chip Antenna

A Compact UHF-RFID Tag Antenna With Embedded AMC for Metallic Objects

Simulation and Design of On-Chip Loop Antenna for 2.4ghz RFID Application

RFID Tag Antenna Quick Design and Optimization by Using Artificial Neural Network Modeling Technique