Abstract:The communication quality between an RFID tag and a reader in a RFID network, especially the parameters of the passive tag antenna such as reading range, directivity and return loss, is affected by several factors from the environment. For practical RFID application, since the environment is complex and volatile, these factors include metallic surface of products, absorptions and impacts from neighbor tag antennas like scattering and mutual coupling. In this paper, it consists of the analysis of impacts caused by these factors and the design of passive tag antennas with resonant frequency 915 MHz able to be used in practical RFID applications against those impacts. Comparing with former ones, the proposed antenna reduces the size of the tag antenna to approximately commercial standard (18 mm x 48 mm x 3 mm) by using certain structures applied in the unit cell of metamaterial or HIS, while the properties including directivity, return loss and input impedance are still appropriate for RFID applications. Simulation results from HFSS indicates that at 915 MHz, the return loss can be about 21 dB, as most of the power can be radiated into the space towards the receiver. Meanwhile, the input impedance Z(0) = 9.4738 + j143.9189 Omega, perfectly matching the impedance of the RFID chip placed on the top surface of the antenna. The above improved parameters play an important role in prolonging the reading range.

RFID Antenna Near the Surface of Metal

Analysis of Dipole-Like Ultra High Frequency Rfid Tags Close to Metallic Surfaces

Electromagnetic Environment of Uhf-Rfid

Bending Effect on Antenna with Radiation Performance for Electronic Tag

A UHF RFID Tag Antenna Placeable on a Metal Surface Without Degraded Performances

Research of RFID Tag Used in Metallic Object Identification

Design of Compact Passive Tag Antenna for Practical Rfid Applications

RFID tag antenna for use on metal

Effects of Different Attaching Positions of Human Body on Wearable Tag Antenna

Influence of UHF Tags in the Different Material Surface to RFID System

Compact Rfid Tag Antenna with Circular Polarization and Embedded Feed Network for Metallic Objects

Magnetic Substrate Folded Dipole Antenna for Uhf Rfid Metal Tag

A Miniaturized 2.45ghz RFID Tag Antenna Using Planar

A Dual-Environment Active RFID Tag Antenna Mountable on Metallic Objects

A Compact UHF-RFID Tag Antenna With Embedded AMC for Metallic Objects

An UHF RFID Circularly Polarized Tag Antenna With Long Read Distance for Metal Objects

Research on an Improved Metal Surface Defect Detection Sensor Based on a 3D RFID Tag Antenna

Dual-Dipole Uhf Rfid Tag Antenna with Quasi-Isotropic Patterns Based on Four-Axis Reflection Symmetry

Design of a Near-Field RFID Antenna Array in Metal Cabinet Environment

A Small RFID Tag Antenna for Metallic Object Using Characteristic Mode

Compact Broadband Circularly Polarized UHF RFID Tag Antenna for Metallic Mounting