Abstract:Reflective e-paper displays show promising prospects with the increasing demand for energy-efficient and sustainable technologies. However, the intrinsic incapability to display in dark environments hinders their broader application, and it is significantly important to enable reflective displays to achieve good display effects under various lighting conditions. Here, a flexible dual-mode display device is proposed, which can demonstrate both reflective and emissive modes and achieve swift and straightforward mode switching by altering the driving waveforms. The single display layer of the device is formed by uniformly dispersing microcapsules and electroluminescent powder within the waterborne polyurethane dielectric matrix, which exhibits a reflective contrast ratio of 5.6 and a maximum luminance of 107.5 cd m-2. At the same time, the device possesses the merits of fast response speed at the millisecond level, high-performance stability, and good mechanical robustness. Besides, through the waveform design, a reflection-emission hybrid mode is proposed for more diverse display effects. Furthermore, a concept of dual-mode contrast ratio is established, which further pinpoints the reflection-emission transition points, thereby prompting the balance between energy-saving and watching experience. As a reflective display technology, electronic paper fails to provide satisfactory content visibility under dim conditions. In this paper, a flexible dual-mode display device is proposed that integrates electrophoretic e-paper with alternating current electroluminescence technology, enabling rapid switching between reflective and emissive mode. Moreover, through waveform design, a reflection-emission hybrid mode is achieved, resulting in diversified display effects. image

P-29: Amorphous silicon driver integration in E-paper display

P-232L: Late-News Poster: New Results on Bistable Photoaligned Ferroelectric LCDs: Grey Scale Generation, Stabilization and Passive Driving Scheme

9‐4: Late‐News Paper: Full Color Organic Light Emitting Diodes on Silicon Micro‐display with Ultra‐high Luminescence and High Resolution

High-Resolution Flexible AMOLED Display Integrating Gate Driver by Metal–Oxide TFTs

A High-Reliability Gate Driver Integrated in Flexible AMOLED Display by IZO TFTs

Intelligent Packaging with Inkjet-Printed Electrochromic Paper Display – A Passive Display Infotag

Study on New Low-Voltage Display Pixel for Electronic Paper

Dual‐Mode Flexible Electrophoretic E‐Paper with Integration of Alternating Current Electroluminescent Technology for Ubiquitous Ambient Light Applications

35.4: A 2.1‐inch AMOLED Display Based on Metal‐Induced Laterally Crystallized Polycrystalline Silicon Technology

59‐3: Distinguished Paper: Wafer Scale Hybrid Monolithic Integration of Si‐based IC and III‐V Epilayers ‐ a Mass Manufacturable Approach for Active Matrix micro‐LED Displays

OLED Microdisplay With Monolithically Integrated CAAC-OS FET and Si CMOS Achieved by Two-Dimensionally Arranged Silicon Display Drivers

19.1: Invited Paper: Electrochromic Display Based on Semiconducting Polymer

Digital driver for 2-inch LTPS AM-OLED displays

30.2: Amorphous Silicon Thin‐Film Transistor Gate Driver Circuit Design with Time Division Driving Method for In‐Cell Touch Display Panel

P-48: Integrated a-IGZO TFT Gate Driver with Programmable Output for AMOLED Display

Progress in Advanced Properties of Electrowetting Displays

31-Inch 4K Flexible Display Employing Gate Driver With Metal Oxide Thin-Film Transistors

Dual-Gate A-Igzo TFTs for Gate Driver Application

A Mixed-Signal Display Driver Chip for 96×64 Color OLED

20.4L: Late‐News Paper: A Flexible AMOLED Display on PEN Substrate Driven by Oxide Thin‐Film Transistors

Optimized Electrophoretic Display: Dynamic Multiwaveform Invocation With Localized Time-Division for Low-Flicker Video Display