Abstract:Although electromagnetic stimulation promises safe and controlled ignition of energetic materials, ultraviolet (UV) to infrared (IR) wavelength sources experience significant photon attenuations in energetic materials. Conversely, radiation in microwave frequencies is recognized for instantaneous volumetric heating capabilities. However, many energetics are poor microwave heaters, and to accelerate the heating, recent efforts focused on adding microwave susceptors that do not participate in the energetic reaction. This is the first effort to demonstrate that nanoscale aluminum (nAl)/manganese oxide (MnO x ) can be rapidly heated at rates ∼104 °C/s under microwave radiation without addition of inert microwave susceptors. Detailed analysis of nanoscale MnO x was performed via X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and transmission electron microscopy (TEM). The samples of MnO x at different loadings of nAl were three-dimensionally (3D) printed into composite films and tested with a microwave applicator at a 2.45 GHz frequency. Infrared thermometry experiments showed that with an increase in MnO x content the heating rate in the samples increases by orders of magnitude. Computational modeling based on the dielectric and thermophysical properties of the materials showed that an electric field is the dominant mechanism accounting for ∼96% of the heating of the nAl/MnO x composites at microwave frequencies. The microwave ignition mechanism was deconvoluted via high-speed IR imaging, in situ time-of-flight mass spectroscopy (TOFMS), temperature-jump (T-jump), and thermogravimetric analysis/differential scanning calorimetry (TGA/DSC) analysis. The results show that microwave stimulation can effectively heat and control ignition in nAl-based thermites with MnO x , where the oxidizer acts dually as a microwave susceptor and an ignition driver.

Microwave Effects and Mechanism in Explosives Materials

Interactions Between Microwaves and Smart Energetic Materials: A Review on Emerging Technologies for Ignition and Combustion Enhancement

The enhanced mechanism of microwave-induced discharge between millimeter activated coke

The mechanism of microwave-induced discharge between submillimeter active coke

Experimental and numerical studies on the heating mechanism of millimeter multi-particle system under microwave irradiation

A review of microwave–metal discharge interaction: Mechanism, regulation, and application for synthesis of nanomaterials

Microwave Synthesis Inorganic Nanoscale Materials

Discussion on Microwave-Matter Interaction Mechanisms by in Situ Observation of “Core-Shell” Microstructure During Microwave Sintering

Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation

Study and Application Status of the Nonthermal Effects of Microwaves in Chemistry and Materials Science – a Brief Review

Effect of Microwave and Ultrasonic Coupling Treatment on Granularity and Microstructure of Pulverized Coal

Experimental study on microwave-induced puffing, micro-explosion, and combustion characteristics of ammonium dinitramide-based liquid propellant droplets

Microwave Ignition Characteristics and Distinction of Typical Nanothermites under Different Electromagnetic Radiation

Effect of microwave irradiation on TATB explosive.

Strengthening effect of microwave on spark ignited spherical expanding flames of methane-air mixture

Study on the Electromagnetic Coupling Characteristics of the Initiating Explosives Based on the Dielectric Polarization Theory

Experimental study on the microwave radiation precursor laws of loading coal in deformation and fracture process

Effect of Microwave Irradiation on the Propensity for Spontaneous Combustion of Inner Mongolia Lignite

Application of Microwave Technology in Material Synthesis

Effect of Microwave Irradiation on TATB Explosive (II): Temperature Response and Other Risk.

Specific Microwave Effect on Sn- and Ti-MFI Zeolite Synthesis