Effects of Ca2+ and Mg2+ on Defluoridation in the Electrocoagulation Process

Huazhang Zhao,Bin Zhao,Wei Yang,Tianhong Li

DOI: https://doi.org/10.1021/es102540t

IF: 11.4

2010-01-01

Environmental Science & Technology

Abstract:Because aqueous ions can influence the defluoridation of the electrocoagulation (EC) process, the effects of Ca(2+) and Mg(2+) were investigated. The behaviors and mechanisms of EC defluoridation in Ca(2+)-containing systems were different from those in Mg(2+)-containing systems. An increase in Ca(2+) concentration improved the defluoridation efficiency (ε(F)), but it could not change the optimal molar ratio of OH(-) and F(-) to Al(3+) (r(OH+F)). The highest ε(F) can usually be obtained at r(OH+F) = 3 for defluoridation. Only a small portion of Ca(2+) entered into the flocs, and Ca(2+) could not influence the mechanism of EC defluoridation. For the Mg(2+)-containing system, the optimal r(OH+F) increased with increasing Mg(2+) concentration. The optimal r(OH+F) was maintained at 3 after the Mg(2+) concentration was corrected using the obtained correction coefficient of 0.3435. About 50% to 70% of the total Mg(2+) entered into the flocs. From the XRD analysis, it was found that some Mg-Al-F layered double hydroxides (LDHs) were formed by Mg(2+), F(-), and Al(3+) during electrolysis. It is proposed for the first time that the formation of Mg-Al-F LDH is one of the mechanisms for EC defluoridation in systems containing both F(-) and Mg(2+).