Abstract:A composite of multi-walled carbon nanotubes incorporated into a benzyl methacrylate-co-ethylene dimethacrylate porous monolith was prepared, characterized and used as solid phase adsorbent and as stationary phase for simultaneous extraction and separation of ten polycyclic aromatic hydrocarbons, followed by nano-liquid chromatography analysis. The extraction and chromatographic parameters were optimized with regard to the extraction efficiency and the quality of chromatographic analytes separation. Under the optimized conditions, all PAHs were separated in 13 min with suitable resolution values (Rs = 1.74-3.98). Addition of a small amount of carbon nanotubes (0.1% with respect to monomers) to the polymerization mixture increased the efficiency for the separation column to over 41,700 plates m-1 for chrysene at flow rate of 0.5 μL min-1. The method showed a wide linear range (1-500 μg L-1 with R2 more than 0.9938), acceptable extraction repeatability (RSDs < 6.4%, n = 3) and reproducibility (RSDs < 12.6%, five parallel-made solid phase extraction cartridges) and satisfactory detection limits (0.02-0.22 μg L-1). Finally, the proposed method was successfully applied to the detection of polycyclic aromatic hydrocarbons in environmental water samples. After a simple extraction procedure with preconcentration factor equal to 100, the average recovery values in ultra-pure, tap and sea water samples were found to be in the range 81.3-95.4% with %RSD less than 6.4. Again, the presence of carbon nanotubes (0.3% relatively to monomers) in native polymer enhanced the extraction performance for the solid phase adsorbent up to 78.4%. The application of the monoliths modified with CNTs in extraction and nano-scale liquid chromatography for analysis of environmental samples offered several advantages; it demonstrated an acceptable precision, low detection limits, good reproducibility, satisfying recoveries and wide dynamic linear ranges.

Layer-By-Layer Self-Assembled Multi-Walled Carbon Nanotubes/Silica Microsphere Composites As Stationary Phase for High-Performance Liquid Chromatography

Two-dimensional MOF Cu-BDC nanosheets/ILs@silica core-shell composites as mixed-mode stationary phase for high performance liquid chromatography

A Micro Gas Chromatography with Separation Capability Enhanced by Polydimethylsiloxane Stationary Phase Functionalized by Carbon Nanotubes and Graphene.

Porous Organic Cage-Embedded C10-Modified Silica as HPLC Stationary Phase and Its Multiple Separation Functions

Superhydrophobic conjugated microporous polymers grafted silica microspheres for liquid chromatographic separation

Preparation, characterization, and analytical applications of a novel polymer stationary phase with embedded or grafted carbon fibers.

Carbon nanotube-based benzyl polymethacrylate composite monolith as a solid phase extraction adsorbent and a stationary phase material for simultaneous extraction and analysis of polycyclic aromatic hydrocarbon in water

Preparation and Evaluation of a Molybdenum Disulfide Quantum Dots Embedded C18 Mixed-Mode Chromatographic Stationary Phase

A composite hydrogel modified silica stationary phase for mixed‐mode liquid chromatography

Layer-by-layer self-assembled graphene oxide/silica microsphere composites as stationary phase for high performance liquid chromatography.

A chiral multi-shelled mesoporous carbon nanospheres used for high-resolution gas chromatography separations

N-methylimidazolium-functionalized monolithic silica column for mixed-mode chromatography.

A mesoporous silica nanoparticles immobilized open-tubular capillary column with a coating of cellulose tris(3,5-dimethylphenyl-carbamate) for enantioseparation in CEC.

A Novel Octadecylsilane Functionalized Graphene Oxide/silica Composite Stationary Phase for High Performance Liquid Chromatography

Incorporation of Multiwalled Carbon Nanotube into a Polymethacrylate‐based Monolith for Ion Chromatography

Synthesis of a Stationary Phase Based on Silica Modified with Branched Octadecyl Groups by Michael Addition and Photoinduced Thiol-Yne Click Chemistry for the Separation of Basic Compounds

Fabrication of SiO2@COF5 microspheres and their application in high performance liquid chromatography

Synthesis and Chromatographic Evaluation of Poly(pentabromostyrene)-Silica Composite: A Versatile Stationary Phase for Separating Both Polar and Non-Polar Aromatic Compounds

Silica microparticles modified with ionic liquid bonded chitosan as hydrophilic moieties for preparation of high-performance liquid chromatographic stationary phases

Preparation and Evaluation of Ultra-Long Open-Tubular Polymeric Porous Layer Capillary Columns with Modified MIL-100(Fe) for Liquid Chromatography

Cyclodextrin-dendrimers Nanocomposites Functionalized High Performance Liquid Chromatography Stationary Phase for Efficient Separation of Aromatic Compounds