Abstract:Poly(azo-pyridyl-urethane)/multi-walled carbon nanotube (PAPU/MWCNT) nanocomposites were prepared by first synthesizing polyurethane followed by solution dispersing MWCNT in the matrix. We have used two different MWCNTs: the first set of MWCNT contained carboxylic acid group (MWCNT-COOH) and the second set contained acid chloride group (MWCNT-COCl). Afterward, these MWCNT particles were used in the preparation of PAPU/MWCNT nanocomposites. In the first set of nanocomposites, MWCNT-COOH and PAPU were just physically mixed and were designated as PAPU/MWCNT-A. In the second set of nanocomposites, PAPU chains were tethered onto the surfaces of MWCNT-COCl particles and designated as PAPU/MWCNT-AC. Two types of nanocomposites were thus fabricated, including acid functionalized nanotube-based non-tethered PAPU/MWCNT and acid chloride functionalized MWCNT-based tethered system. We have incorporated hydroxyl end-terminated polyurethane via “ grafting to” approach to acid chloride functional MWCNT through esterification. Fourier transform infrared spectra confirmed that the matrix was covalently attached to sidewalls of nanotube. Various nanotube loading levels and surface-modified groups were considered to regulate mechanical, thermal and electrical performance of PAPU/MWCNT. The experimental results showed that a moderate loading level of 5 wt. % MWCNT produced the maximum tensile strength (63.1 MPa) in tethered nanocomposites, while the presence of surface carboxylation of MWCNT relatively decreased the tensile strength (49.7 MPa). Comparative studies based on scanning and transmission electron microscopy of the chemically bonded samples revealed unique nano-fibriller morphology. Dynamic mechanical analysis of nanocomposite films showed an increased segmental rigidity with T g of 144–153°C in the tethered system relative to pristine PAPU (133°C). Addition of acid chloride functional MWCNT also contributed to an enhancement in the conductivity (2.9–4.7 S cm −1 ), relative to PAPU/carboxylated MWCNT (2.0–2.7 S cm −1 ).

Preparation and Properties of Waterborne Polyurethane/Poly(Aniline-2.Sulfonic Acid)Modified Carbon Nanotubes Composites

Poly(aniline-2-sulfonic acid) modified multiwalled carbon nanotubes with good aqueous dispersibility.

Polyphosphazene Nanotube and Modified Waterborne Polyurethane Prepared by in Situ Polymerization

Preparation of Carbon Nanotubes/waterborne Polyurethane Composites with the Emulsion Particles Assisted Dispersion of Carbon Nanotubes

Preparation and characterization of polyurethane/multiwalled carbon nanotube composites

Carbon Nanotubes Modified Unsaturated Polyester Resin Composites

Synthesis and Application of Hydroxyethyl Methacrylate Modified Waterborne Polyurethane

Influence of the Dispersion of Carbon Nanotubes on the Electrical Conductivity, Adhesion Strength, and Corrosion Resistance of Waterborne Polyurethane Composites

Poly(aniline-co-o-anisidine)/Sulfonated Carbon Nanotubes Composites Prepared by Surface Adsorption Method

Preparation and properties of polyurethane/multiwalled carbon nanotube nanocomposites by a spray drying process

Effect of modified filler surfaces and filler-tethered polymer chains on morphology and physical properties of poly(azo-pyridyl-urethane)/multi-walled carbon nanotube nanocomposites

Preparation and properties of water‐borne polyurethane‐sodium lignosulfonate/nano‐calcium carbonate composites

Mechanical and Thermal Properties of Functionalized Multiwalled Carbon Nanotubes and Multiwalled Carbon Nanotube–polyurethane Composites

Preparation and anti‐corrosion performance of nano Polyaniline/Polyurethane interpenetrating network composite coating

Preparation and corrosion resistance of polyaniline and waterborne polyurethane composite coating film

The Preparation and Properties of PEN/MWNT Nanocomposites

Study on Preparation and Properties of A Comb-branched Waterborne Polyurethane

Synthesis and Properties of Novel Polyurethane−Urea/Multiwalled Carbon Nanotube Composites

Effect of polydopamine-modified multi-walled carbon nanotubes on the thermal stability and conductivity of UV-curable polyurethane/polysiloxane pressure-sensitive adhesives

Preparation of novel functionalized carbon nanotubes and composite application in polyurethane elastomers

The Preparation of Biodegradable Polyurethane/carbon Nanotube Composite Based on in Situ Cross‐linking