Abstract:Poly(azo-pyridyl-urethane)/multi-walled carbon nanotube (PAPU/MWCNT) nanocomposites were prepared by first synthesizing polyurethane followed by solution dispersing MWCNT in the matrix. We have used two different MWCNTs: the first set of MWCNT contained carboxylic acid group (MWCNT-COOH) and the second set contained acid chloride group (MWCNT-COCl). Afterward, these MWCNT particles were used in the preparation of PAPU/MWCNT nanocomposites. In the first set of nanocomposites, MWCNT-COOH and PAPU were just physically mixed and were designated as PAPU/MWCNT-A. In the second set of nanocomposites, PAPU chains were tethered onto the surfaces of MWCNT-COCl particles and designated as PAPU/MWCNT-AC. Two types of nanocomposites were thus fabricated, including acid functionalized nanotube-based non-tethered PAPU/MWCNT and acid chloride functionalized MWCNT-based tethered system. We have incorporated hydroxyl end-terminated polyurethane via “ grafting to” approach to acid chloride functional MWCNT through esterification. Fourier transform infrared spectra confirmed that the matrix was covalently attached to sidewalls of nanotube. Various nanotube loading levels and surface-modified groups were considered to regulate mechanical, thermal and electrical performance of PAPU/MWCNT. The experimental results showed that a moderate loading level of 5 wt. % MWCNT produced the maximum tensile strength (63.1 MPa) in tethered nanocomposites, while the presence of surface carboxylation of MWCNT relatively decreased the tensile strength (49.7 MPa). Comparative studies based on scanning and transmission electron microscopy of the chemically bonded samples revealed unique nano-fibriller morphology. Dynamic mechanical analysis of nanocomposite films showed an increased segmental rigidity with T g of 144–153°C in the tethered system relative to pristine PAPU (133°C). Addition of acid chloride functional MWCNT also contributed to an enhancement in the conductivity (2.9–4.7 S cm −1 ), relative to PAPU/carboxylated MWCNT (2.0–2.7 S cm −1 ).

Preparation of novel functionalized carbon nanotubes and composite application in polyurethane elastomers

Hindered phenol grafted carbon nanotubes for enhanced thermal oxidative stability of polyethylene

Functionalization of Carbon Nanotubes by Corona‐Discharge Induced Graft Polymerization for the Reinforcement of Epoxy Nanocomposites

Functionalized MWNT-Doped Thermoplastic Polyurethane Nanocomposites for Aerospace Coating Applications

Preparation and characterization of polyurethane/multiwalled carbon nanotube composites

Synthesis and Properties of Novel Polyurethane−Urea/Multiwalled Carbon Nanotube Composites

Carbon nanotubes grafted by polyurethane chains with dopamine-mediation to enhance the mechanical and damping properties of polyurethane elastomer

Preparation and Characterization of Polyurethane/Multi-Walled Carbon Nanotubes Composites with Multi Functional Performance

PPTA-oligomer Functionalized Multiwalled Carbon Nanotubes Synthesized by "One-Pot" Method for Reinforcement of Polyvinyl Chloride

Carbon Nanotubes- Filled Thermoplastic Polyurethane- Urea And Carboxylated Acrylonitrile Butadiene Rubber Blend Nanocomposites

The Study on the Microstructures and High Performances of Melt Blending Polyurethane/Multiwalled Carbon Nanotubes Composites

Effect of modified filler surfaces and filler-tethered polymer chains on morphology and physical properties of poly(azo-pyridyl-urethane)/multi-walled carbon nanotube nanocomposites

Dielectric, mechanical and electro-stimulus response properties studies of polyurethane dielectric elastomer modified by carbon nanotube-graphene nanosheet hybrid fillers

Effects of polyurethane/functionalised carbon nanotube interfacial interactions on tensile and compressive properties – molecular dynamics simulations

On the Tensile Tests of Polyurethane and Its Composites with Carbon Nanotubes

Thermosetting polyurethane‐multiwalled carbon nanotube composites: Thermomechanical properties and nanoindentation

Effects of Carbon Nanotube Diameter and Functionality on the Properties of Soy Polyol-Based Polyurethane

Functionalization of multi-walled carbon nanotubes with non-reactive polymers through an ozone-mediated process for the preparation of a wide range of high performance polymer/carbon nanotube composites

Polyurea-Functionalized Multiwalled Carbon Nanotubes

Preparation and Characterization of Modified Nano Carbon Black/Polyurethane Composites

Preparation and dielectric properties of polyurethane elastomers filled with nano carbon fillers