Study on Technique of KCl Recovery by Flotation from the Overflow Potash Ore

顾启东,宋兴福,汪瑾,李承宝,李辉林,李小松,于建国

DOI: https://doi.org/10.3969/j.issn.1003-9015.2010.04.028

2010-01-01

Abstract:The overflow potash ore is the deposit of flotation overflow,which is discharged from the production of KCl by the reverse-flotation and cold-crystallization process.KCl and NaCl crystals are the main components of the ore,and KCl content in it is about 70%.Flotation technique was adopted to separate the KCl from NaCl in the overflow ore,and a flotation tube with a cooling jacket was used to make the flotation could take place at certain temperature.The core sheet in the tube was used as the bubble producer.Since an amount of alkymorpholine exists in the overflow ore,no other chemicals are needed to be added in the overflow ore for its further flotation process.During the flotation of the overflow ore,the NaCl is concentrated in the foams and the KCl crystal is remained in the liquid and then precipitated.Through the experiments,the effects of percent solid pulp and temperature on the flotation efficiency were investigated.Based on the experimental results,it was found that,by further flotation at 20℃ and keeping the variation of percent solid pulp in the range of 21% to 38%,the crude product of overflow ore flotation is consisted of above 92% KCl,and the KCl recovery is up to 85%.While when the percent solid pulp was kept at 25% and the variation of the temperature was controlled at the range of 0.0～20.0℃,the crude product is consisted of 92% KCl,and the KCl recovery of 70%～86% was obtained.After washing the crude product,the fine product consisting of above 97% KCl could be achieved.