A Comparative Study of Quartz and Potassium Feldspar Flotation Process Using Different Chemical Reagents

Kalyani Mohanty,Josep Oliva,Pura Alfonso,Carlos Hoffmann Sampaio,Hernan Anticoi
DOI: https://doi.org/10.3390/min14020167
IF: 2.5
2024-02-05
Minerals
Abstract:An improved method for producing high-purity quartz (Qtz) and potassium feldspar (Kfs) concentrates was developed using various chemical reagents. Froth flotation experiments on a Qtz–Kfs mixture showed that quartz could be selectively floated from Kfs in diluted hydrofluoric acid (HF) using a frother. Similarly, feldspar could be selectively floated from quartz. Recovery rates depended on reagent choice, pH levels, HF modifier dosage, and HF conditioning time. High recoveries and good grades were achieved for both quartz and feldspar at low pH levels. Among the five collectors tested, Brij C20 showed the highest recovery when used in conjunction with HF and a frother alone and a concentrate containing 82.8% quartz was obtained at a 96% recovery rate. Good recoveries were also achieved with collectors like Duomeen C and Flotigam V4343 for floating K-feldspar, with a Kfs concentrate of 99.9% purity at a 94% recovery. Lilaflot OT 55 and Duomeen TDO were less effective. The concentration of HF was 22 kg/t, which implies an important reduction with respect to the earlier research.
geochemistry & geophysics,mineralogy,mining & mineral processing
What problem does this paper attempt to address?
The paper attempts to address the problem of developing a new process to produce high-purity quartz (Quartz, Qtz) and potassium feldspar (Potassium Feldspar, Kfs) concentrates using different chemical reagents. Specifically, the study aims to improve the purity of quartz and potassium feldspar through flotation techniques, particularly the effects of using different combinations of collectors and frothers under low pH conditions. ### Main Research Objectives: 1. **Improve Purity**: Achieve the separation of high-purity quartz and potassium feldspar by selecting appropriate chemical reagents. 2. **Optimize Flotation Conditions**: Investigate the effects of different collectors, pH values, hydrofluoric acid (HF) modifier dosages, and HF pretreatment times on flotation performance. 3. **Reduce HF Usage**: Explore ways to reduce the use of hydrofluoric acid while maintaining high recovery rates to lower environmental pollution and production costs. ### Research Background: - **Industrial Applications**: High-purity quartz is mainly used in the manufacture of glass, water filtration materials, and ceramic fillers, while high-purity potassium feldspar is used in the manufacture of ceramic coatings, insulating materials, and electrodes. - **Limitations of Existing Methods**: Traditional flotation methods usually require large amounts of hydrofluoric acid, which is not only harmful to the environment but also increases production costs. ### Research Methods: - **Experimental Materials**: Commercial-grade high-purity quartz and potassium feldspar were used as raw materials. - **Flotation Experiments**: Batch flotation experiments were conducted to test the flotation performance of different combinations of chemical reagents (including collectors and frothers) under various conditions. - **Analytical Methods**: Equipment such as X-ray fluorescence spectroscopy (XRF), pH meters, and Zeta potential analyzers were used to analyze chemical composition and surface properties. ### Experimental Results: - **Optimal Collector**: Among the five collectors tested, Brij C20 performed the best, achieving a quartz content of 82.8% with a recovery rate of 96%. - **Potassium Feldspar Flotation**: Using Duomeen C and Flotigam V4343 as collectors, a potassium feldspar purity of 99.9% with a recovery rate of 94% was achieved. - **Reduced HF Usage**: The study found that the HF usage could be reduced from 274 kg/t to 22 kg/t while maintaining high recovery rates. ### Conclusion: The study successfully developed a new flotation process that effectively separates high-purity quartz and potassium feldspar using different chemical reagents under low pH conditions and significantly reduces the use of hydrofluoric acid. This achievement provides a more environmentally friendly and cost-effective solution for industrial applications.