Abstract:Fluid catalytic cracking (FCC) is a production process that converts petroleum into petroleum products in the presence of catalysts. The performance of an FCC catalyst plays a decisive role in petroleum refining. An FCC catalyst mainly comprises a molecular sieve (catalytic cracking active center), a carrier, and a binder. The carrier can enable the precracking of the heavy oil in its large pore, which can improve the overall activity of the catalyst and the conversion rate of heavy oil. The surface area and pore structure of carrier materials with different microscopic morphologies differ, which significantly affects the precracking of heavy oil molecules. Therefore, here, FCC catalysts were prepared using flake kaolinite, tubular halloysite, natural flake-tube-combined kaolinite, and mixed kaolinite as support materials, respectively. The FCC catalysts were used in FCC-heavy oil, and the influence of the carrier material morphology on the comprehensive performance of the catalysts was studied. The strength and cracking performance of the catalyst prepared using flake Maoming (M) were poor, whereas the catalyst prepared using tubular halloysite exhibited a good strength, high activity, and a good cracking ability for heavy oil. The catalyst prepared using natural flake-tube combined with Suzhou (S) exhibited a good strength and cracking performance, and it has been widely used in the industrial production of FCC catalysts. When 40% tube-like halloysite was mixed into M, the attrition of the prepared catalyst decreased by 0.5 units, the microreactivity increased by 1.4 units, the gasoline + liquefied petroleum gas (LPG) yield increased by 3.09 percentage points, and the gasoline research octane number (RON) increased by 0.6 units. The comprehensive performance of the catalyst can reach or exceed that of the natural-lamp-tube-based kaolin carrier. The results can not only provide guidance for the stable quality control of kaolin, but they can also significantly alleviate the resource restrictions for FCC catalyst production enterprises.

A Study of In-Situ Crystallization Synthesis of FCC Catalysts with Sepiolite

Ex-situ Presulfiding of Hydrotreating Catalysts

In Situ Synthesis of Nb-modified AFI Topology Molecular Sieve and Its Modulation on the Formantion of High-Efficiency Catalyst for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

Synthesis of Si-Modified Pseudo-Boehmite@kaolin Composite and Its Application as a Novel Matrix Material for FCC Catalyst

Effect of the Microstructure of Support Materials on Cracking Catalyst Performance

Evaluation of Crystalline Structure and SO2 Removal Capacity of a Series of MgAlFeCu Mixed Oxides As Sulfur Transfer Catalysts

The Effect of Calcination Temperature on the Structure and Activity of TiO2/SiO2 Composite Catalysts Derived from Titanium Sulfate and Fly Ash Acid Sludge

Novel fabrication of a sepiolite supported cobalt-based catalyst via a coprecipitation-reduction method

In-Situ Synthesis of Cu-SSZ-13 Catalyst: Effect of Crystallization Time on NH3-SCR Performance

In Situ Synthesis of Cu-SAPO-34/Cordierite with Ultrasonic Treatment and its Property of NOx Removal

Influence of Modification of FCC Catalyst on the Performance of Sulfur Transfer

Effect of Catalyst Crystallinity on V-Based Selective Catalytic Reduction with Ammonia

Enhancement of SCR Activity and Mechanical Stability on Cordierite Supported V2O5-WO3/TiO2 Catalyst by Substrate Acid Pretreatment and Addition of Silica

Characterization of Co-Cu/SiO2 Catalysts

[Preparation Bimetallic Heterogeneous Fenton-like Catalyst As Sepiolite Supported and Its Surface Chemical Characterization].

The Influence of Crystallite Size on the Structural Stability of Cu/SAPO-34 Catalysts

In Situ Catalytic Synthesis of Si3N4 Nanowhiskers Reinforced SiC Refractories and Their High-Temperature Properties

Sintering Temperature Effects on SCR Catalyst Characterization and Catalytic Efficiency

Progress in China′s Research on Kaolin Modification and Applications as Synthetic Molecular Sieve

Catalytic Preparation of Si3N4-Bonded SiC Refractories and Their High-Temperature Properties

Synthesis of Cu-SSZ-13 from Zeolite Analcime Derived from Solid Waste and Natural Minerals for Selective Catalytic Reduction of NO