Abstract:High performance thermal energy systems are crucial in fulfilling the growing demand of thermal energy. Consequently, numerous heat transfer enhancements have been proposed. Some of the promising methods are boiling flow heat transfer, helical coiled tube and metal foam insert. Although the performance of each strategy has been extensively studied, based on our literature review, the effectiveness of combining these strategies has not been investigated. This missing information may impede further development of efficient heat transfer systems. This study is therefore performed to investigate subcooled flow boiling heat transfer in helical tube with copper foam insert. A high-resolution three-dimensional pore scale model that considers the shape, porosity and pore density of the metal foam is developed and validated against the published experimental results. Using the model, the effect of inlet temperature, mass flux, wall heat flux, porosity, pore density and half-filled metal foam are studied. The results suggest that operating parameters have mild effects on the heat transfer performance. In contrast, porosity and pore density show significant influence in heat transfer coefficient and pressure drop. It has also been found that total heat transfer surface area and base area are better in characterizing heat transfer in pore-scale level than porosity and pore density at pore-scale level. Moreover, implementing metal foam at outer half of the tube is observed to offer slightly better heat transfer than implementing it at the inner side by around 4.8%. Overall, this study indicates that helical metal foam tubes offer the best performance at mass flux of 200 kg/m 2 ∙s with performance index of 0.72, while straight tubes with 0.90 porosity has the highest performance index of 0.66. Empirical correlations to relate dimensionless parameters to the Nusselt number and friction factor is generated. Finally, the model developed in this study can serve to provide guidelines for the upcoming studies in boiling in metal foam structure and assist in designing metal foam heat exchangers.

Simulation on heat and mass transfer of fluid flow boiling in metal foam

Numerical Modelling of Flow Boiling Heat Transfer in Horizontal Metal‐Foam Tubes

Analytical Considerations of Flow Boiling Heat Transfer in Metal-Foam Filled Tubes

The Numerical Simulation of Liquid-Vapor Stratified Flow in Horizontal Metal-Foam Tubes

Numerical Simulation of Convective Heat Transfer in Metal Foam Filled Pipes

Analytical Considerations of the Flow Boiling Heat Transfer in Metal-foam Tubes

Numerical Study of Heat and Mass Transfer in the Original Structure and Homogeneous Substitution Model for Three Dimensional Porous Metal Foam

Numerical study of a hybrid thermal lattice Boltzmann method for pool boiling heat transfer on a modeled hydrophilic metal foam surface

Numerical Simulation Of Non-Equilibrium Conjugate Heat Transfer In Tubes Partially Filled With Metallic Foams

Pore-Scale Simulation on Pool Boiling Heat Transfer and Bubble Dynamics in Open-Cell Metal Foam by Lattice Boltzmann Method

Numerical Simulation of Metal Foam/Paraffin Melting Process

Heat transfer analysis of subcooled flow boiling in copper foam helical coiled heat exchanger – A pore-scale numerical study

Pore-scale Investigation on Flow Boiling Heat Transfer Mechanisms in Gradient Open-Cell Metal Foams by LBM

Numerical simulation and experimental validation of heat transfer and pressure drop characteristics in metal foam under wet conditions

Numerical study of solid-liquid phase change in metallic foam

Lattice Boltzmann Simulation of Melting of Phase Change Materials in Metal Foams at Pore Scale

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

Numerical Simulation on Enhanced Heat Transfer of Metal Foam Based on LBM

Metal foams for enhanced boiling heat transfer: a comprehensive review

Volumetric Convective Heat Transfer Coefficient Model for Metal Foams

Pore-scale Simulation of Forced Convection Heat Transfer under Turbulent Conditions in Open-Cell Metal Foam