Abstract:High performance thermal energy systems are crucial in fulfilling the growing demand of thermal energy. Consequently, numerous heat transfer enhancements have been proposed. Some of the promising methods are boiling flow heat transfer, helical coiled tube and metal foam insert. Although the performance of each strategy has been extensively studied, based on our literature review, the effectiveness of combining these strategies has not been investigated. This missing information may impede further development of efficient heat transfer systems. This study is therefore performed to investigate subcooled flow boiling heat transfer in helical tube with copper foam insert. A high-resolution three-dimensional pore scale model that considers the shape, porosity and pore density of the metal foam is developed and validated against the published experimental results. Using the model, the effect of inlet temperature, mass flux, wall heat flux, porosity, pore density and half-filled metal foam are studied. The results suggest that operating parameters have mild effects on the heat transfer performance. In contrast, porosity and pore density show significant influence in heat transfer coefficient and pressure drop. It has also been found that total heat transfer surface area and base area are better in characterizing heat transfer in pore-scale level than porosity and pore density at pore-scale level. Moreover, implementing metal foam at outer half of the tube is observed to offer slightly better heat transfer than implementing it at the inner side by around 4.8%. Overall, this study indicates that helical metal foam tubes offer the best performance at mass flux of 200 kg/m 2 ∙s with performance index of 0.72, while straight tubes with 0.90 porosity has the highest performance index of 0.66. Empirical correlations to relate dimensionless parameters to the Nusselt number and friction factor is generated. Finally, the model developed in this study can serve to provide guidelines for the upcoming studies in boiling in metal foam structure and assist in designing metal foam heat exchangers.

Analytical Considerations of Flow Boiling Heat Transfer in Metal-Foam Filled Tubes

Analytical Considerations of the Flow Boiling Heat Transfer in Metal-foam Tubes

Numerical Modelling of Flow Boiling Heat Transfer in Horizontal Metal‐Foam Tubes

Flow Boiling Heat Transfer in Horizontal Metal-Foam Tubes

The Numerical Simulation of Liquid-Vapor Stratified Flow in Horizontal Metal-Foam Tubes

Analytical solution of forced convective heat transfer in tubes partially filled with metallic foam using the two-equation model

Simulation on heat and mass transfer of fluid flow boiling in metal foam

Numerical Simulation Of Non-Equilibrium Conjugate Heat Transfer In Tubes Partially Filled With Metallic Foams

Numerical study of conjugated heat transfer in metal foam filled double-pipe

EXPERIMENTAL INVESTIGATION OF BOILING HEAT TRANSFER IN HORIZONTAL TUBE PARTIALLY FILLED WITH METAL-FOAM

Metal foams for enhanced boiling heat transfer: a comprehensive review

Heat transfer analysis of subcooled flow boiling in copper foam helical coiled heat exchanger – A pore-scale numerical study

Experimental and Numerical Studies on Enhanced Flow Boiling in Tube with Superwetting Micro-Finned Surfaces

Experimental Investigation on Heat Transfer Phenomenon in Metal Foam Filled Tubes

Flow boiling of refrigerant in horizontal metal-foam filled tubes: Part 2 – A flow-pattern based prediction method for heat transfer

Experimental investigation of the subcooled flow boiling heat transfer of water and nanofluids in a horizontal metal foam tube

Experimental Investigation on Flow Condensation in Horizontal Tubes Filled with Annular Metal Foam

Influence of Tube Diameter on Heat Transfer Characteristics of Refrigerant-Oil Mixture Flow Boiling in Metal-Foam Filled Tubes

A Numerical Study of Multiphase Flow Boiling Heat Transfer of Nanofluids in the Horizontal Metal Foam Tubes

Numerical Investigation on Forced Convection of Tubes Partially Filled with Composite Metal Foams under Local Thermal Non-Equilibrium Condition

Thermal Analysis on Metal-Foam Filled Heat Exchangers. Part II: Tube Heat Exchangers