Abstract:Synthesis and characterization of PVA‐fumaric acid cross‐linked biodegradable films. Polyvinyl alcohol (PVA) is a widely used polymer that is biocompatible, nontoxic, and water‐soluble due to the presence of hydroxyl groups in its domain. This study aims to investigate the effects of fumaric acid (FA) cross‐linking and thermal cross‐linking (TC) on the PVA's mechanical and thermal properties. When the FA is mixed with PVA, it was found in the chemical reaction that the OH groups of PVA are condensing with the carboxylic acid units of FA to yield new ester linkages and water as a by‐product, which further results in the reduction of the water absorption capacity. Quantitatively, the addition of 8 (wt. /wt. %) FA resulted in a minimum of 65% water absorption rate, as compared with 117% for pure PVA. The mechanical and thermal properties of PVA also enhanced with the addition of 2% to 8% FA by weight. For the TC case, the % increase in ultimate tensile strength was 30.9% and 42.5% with and without TC, respectively. As the wt. % of FA increased from 2 to 10%, the % elongation value decreased for both with and without TC films relative to pure PVA. The thermogravimetric analysis revealed the change in degradation temperature of FA‐PVA blended film in comparison with pure PVA. Dynamic mechanical analysis was utilized to analyze the viscoelastic nature and temperature variation at the glass transition temperature. The current fabricated film is a potential candidate for the food packaging films application; moreover, the results reported in this investigation will accelerate the industrial applications of biodegradable PVA. Highlights Increasing the weight percentage of fumaric acid leads to an enhancement in mechanical and thermal properties of the film. Esterification is the usual reaction between fumaric acid and polyvinyl alcohol (PVA), in which ester linkages are formed when the carboxyl groups (‐COOH) of fumaric acid and the hydroxyl groups (‐OH) of PVA combine. Water absorption characteristics of the film reduces as the wt. % of fumaric acid increases. Thermal cross‐linking of the film leads to further improvements in mechanical and thermal properties. The overall effect of increasing the wt. % of fumaric acid is negative on the glass transition temperature of the film. The developed film is a potential candidate for the food packaging films application.

Studies on Properties of Pva Film Plasticized with Mixture of Urea/Ethanolamine

Suppression of the Skin-Core Structure of Poly(vinyl Alcohol) Films by Adding Urea/Diethanolamine to Improve the Mechanical and Optical Properties

Physico-Mechanical and Thermal Properties of Thermoplastic Poly(Vinyl Alcohol) Modified Thermosetting Urea Formaldehyde Resin

Influences of individual and composed poly(vinyl alcohol) suspending agents on particle morphology of suspension poly(vinyl chloride) resin

Structure-property correlation of polyvinyl alcohol films fabricated by different processing methods

Preparation and characterization of PVA-ultra-high molecular weight PEO blend films

Influence of PVA resin and cross-linking agent on the structure and properties of semi-refined carrageenan-based packaging films

Preparation and Characterization of Graft Copolymer EVA-g-PU

ULTRAVIOLET IRRADIATION MODIFICATION OF HDPE AND MECHANICAL PROPERTIES OF ITS BLEND WITH PVA

Influence of Complex Plasticizer on Plasticizing Effects and Rheological Properties of Plasticized Poly(Vinyl Alcohol)

Polyglycerol‐modified polyvinyl alcohol with improved stability during thermoplastic processing

Molecule structure design by synergistic crosslinking in the PVA matrix and its physical properties regulation

Water Resistance, Mechanical Properties and Water-Induced Shape Memory Properties of Poly(vinyl Alcohol) Materials Modified by Waste Polyester Depolymerization Monomer

Preparation of EVA modified urea-formaldehyde resin/stone powder composite materials

Experimental synthesis and characterization of PVA‐fumaric acid cross‐linked biodegradable films: Implications as a sustainable matrix for composites

Highly Oriented Thermoplastic Poly (vinyl alcohol) Films by Uniaxial Drawing: Effect of Stretching Temperature and Draw Ratio

The Investigation Plasticizing Mechanism on Poly (vinyl alcohol)/Water/Caprolactam System and the Preparation of Raw PVA Fibers by Melt Spinning

Properties of polyvinyl alcohol films reinforced by citric acid modified cellulose nanocrystals and silica aerogels

Green and renewable thermoplastic polyvinyl alcohol/starch blend film fabricated by melt processing

Molecular Mobility and Morphology Change of Poly(vinyl Alcohol) (PVA) Film As Induced by Plasticizer Glycerol

Mechanical and Thermal Characteristics of Films from Glycerol Mixed Emulsified Carnauba Wax/Polyvinyl Alcohol